Full Freeview on the Emley Moor (Kirklees, England) transmitter
Brian Butterworth first published this on - UK Free TV
Google Streetview | Google map | Bing map | Google Earth | 53.611,-1.666 or 53°36'41"N 1°39'57"W | HD8 9TF |
The symbol shows the location of the Emley Moor (Kirklees, England) transmitter which serves 1,550,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Emley Moor (Kirklees, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Emley Moor transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Emley Moor transmitter?
BBC Look North (Leeds) 1.9m homes 7.4%
from Leeds LS9 8AH, 22km north-northeast (22°)
to BBC Yorkshire region - 56 masts.
ITV Calendar 1.9m homes 7.4%
from Leeds LS3 1JS, 22km north-northeast (16°)
to ITV Yorkshire (Emley Moor) region - 59 masts.
All of lunch, weekend and 80% evening news is shared with Belmont region
Are there any self-help relays?
Derwent B | Active deflector | 74 homes | |
Derwent C | Active deflector | (second level) | |
Dunford Bridge | Active deflector | 14 km S Huddersfield | 15 homes |
Hmp Leeds | Transposer | 30 homes | |
Thixendale | Transposer | 25 km ENE York | 40 homes |
How will the Emley Moor (Kirklees, England) transmission frequencies change over time?
1956-80s | 1984-97 | 1997-98 | 1998-2011 | 2011-13 | 5 Feb 2020 | ||||
VHF | B E T | B E T | B E T | B E T | W T | ||||
C10 | ITVwaves | ||||||||
C32 | com7 | ||||||||
C33 | SDN | ||||||||
C34 | com8 | ||||||||
C36 | ArqA | ||||||||
C37 | C5waves | C5waves | |||||||
C39 | _local | ||||||||
C41 | C4waves | C4waves | C4waves | BBCB | BBCB | ||||
C44 | BBC1waves | BBC1waves | BBC1waves | D3+4 | D3+4 | ||||
C47 | ITVwaves | ITVwaves | ITVwaves | BBCA | BBCA | ||||
C48 | ArqB | ArqB | |||||||
C51tv_off | BBC2waves | BBC2waves | BBC2waves | SDN | |||||
C52tv_off | ArqA | ||||||||
C55tv_off | com7tv_off | ||||||||
C56tv_off | LLS |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 7 Sep 11 and 21 Sep 11.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-5 | 870kW | |
SDN, ARQA, ARQB, BBCA, D3+4, BBCB | (-7dB) 174kW | |
com7 | (-12dB) 54.8kW | |
com8 | (-12.3dB) 51.2kW | |
Mux 1*, Mux 2*, Mux B*, Mux C* | (-19.4dB) 10kW | |
Mux A*, LLS | (-22.4dB) 5kW | |
Mux D* | (-23.4dB) 4kW |
Local transmitter maps
Emley Moor Freeview Emley Moor DAB Emley Moor TV region BBC Yorkshire Yorkshire (Emley Moor micro region)Which companies have run the Channel 3 services in the Emley Moor transmitter area
|
|
Friday, 3 February 2012
D
Dave Ridley4:42 PM
Woking
Freeview was ok last year most of year
Have TV with built in freeview box
Then when atmospherics in the winter kicked in warm temperatures etc noticed pixellating LOS etc
Receive from Crystal Palace, do not know if it will improve after switch-over may look at Antenna and cabling on the roof but currently service is better on analogue.
Currently Analogue channels ok
link to this comment |
Dave's: mapD's Freeview map terrainD's terrain plot wavesD's frequency data D's Freeview Detailed Coverage
J
jb385:07 PM
Huddersfield
John: Anyone experiencing problems with their Freeview reception can get advice by just by entering their post code in the box at the top right hand side of every page and posting a question (rather than a statement) and someone will check the reception predictions for the location as well as any other factors that might apply, advising accordingly.
link to this comment |
jb38's: mapJ's Freeview map terrainJ's terrain plot wavesJ's frequency data J's Freeview Detailed Coverage
Sunday, 5 February 2012
EMLEY MOOR transmitter - Over the next week Emley Moor main transmitter: TV (digital) Liable to interruption, Radio (analogue) working normally, Radio (digital) working normally. [DUK]
link to this comment |
EMLEY MOOR transmitter - Over the next week Emley Moor main transmitter: TV (digital) Liable to interruption, Radio (analogue) working normally, Radio (digital) working normally. [DUK]
link to this comment |
Thursday, 9 February 2012
P
P Benatmane10:16 AM
why does my humax pvr and the free view digibox in the next room both freeze each wednesday?the pvr freezes at every use on wednesdays even after trying the usual methods of defreezing. the digibox only needs resetting once.
link to this comment |
J
jb388:22 PM
P Benatmane: Basically to get an idea of whats happening carry out a signal strength / quality check on the Humax PVR whilst everything is working normally, making a note of the indications seen, then assuming that you mean that the picture is freezing(?) carry out the same check noting what changes have taken place.
It would also have been of assistance to anyone offering advice if you had mentioned your location, (pref: post code) that is as well as the model of Freeview box and also the Humax PVR you are referring to.
link to this comment |
Friday, 10 February 2012
A
AJW9:31 AM
I have a JVC TV with a built in hard drive. It also freezes every Wednesday. It is fine when first switched on, but after a couple of minutes I am unable to change channels, access the programme guide, or my library of recordings. It started happenind mid-December. I am guessing there must be something in the programme guide for Wednesdays which causes the software to crash.
Postcode SE25 - Crystal Palace transmitter.
link to this comment |
AJW: There have been a number of reports of boxes/TVs apparently freezing on particular days. I'm not an expert here, but I have noticed that these seem to be those that are on the list for firmware updates that are being broadcast at the time the device hangs.
See this page:
DTG :: DTT Receiver Downloads
Could you check to see if you have latest firmware version (i.e. the version that is being broadcast, as shown on the page I gave you a link to)? If it isn't the latest, then maybe it is updating firmware. As I say, I'm not exactly sure what these things do when updating, but clearly they will be innoperable.
A key question is do you switch it off at the wall when not in use? If so, then I guess that the first thing it does is update (at times that the update is broadcast). For this reason, leave it on at the wall overnight (or at least so it is turned on whilst the update is broadcast and for which you don't need to use the machine).
link to this comment |
Sunday, 12 February 2012
T
Tim Searle10:41 AM
We have been getting digital signals from Emley Moor here at Dronfield since switch over. Sometime in the last few weeks we have lost C48, C51 and C52. The info says signal 85%, quality 0%. I've gone back to installation -> manual tuning (which I had to use at changeover) but that looks in order (right frequency) and there the info is strength 85% quality 100%.
What has changed? I'm reluctant to do factory rest plus full manual retune, as it was a bit of a performance at changeover, until I can be sure this will cure the problem.
link to this comment |
Tim Searle: The "FEC" (forward error correction) of the commercial multiplexes from Emley Moor was changed on 31st January. I haven't had any issues using the said transmitter.
I'm not an expert on these things, but I can only wonder if your tuner has stored the FEC mode being used and is therefore expecting it as it was prior to the change.
The technical explanation is that the capacity has been increased the equivalent of two shopping channels.
Some receivers are easier to tune that others. There are quite a few transmitters that you could pick up when auto-tuning:
Postcode Checker - Trade View
Running the automatic tuning with the aerial unplugged might wipe it. I did this with one box and it didn't wipe anything!
If this is the case, the work-around might be to get it to tune in one of the multiplexes (using the automatic tuning sequence) by having the aerial unplugged for most of the scan except the target multiplex.
Looking at the list of transmitters on Digital UK Trade View predictor, try to pick up Ch51 (or Ch52). Then manually add the rest.
Some receivers will give the UHF channel numbers as they scan them. If it's a percentage only scale, then calculate it on the basis that it starts at channel 21 and goes up to channel 68.
link to this comment |
Select more comments
Your comment please