Full Freeview on the Rowridge (Isle Of Wight, England) transmitter
 | Google Streetview |  | Google map |  | Bing map |  | Google Earth |  | 50.676,-1.369 or 50°40'35"N 1°22'7"W |  | PO30 4HT |
The symbol shows the location of the Rowridge (Isle Of Wight, England) transmitter which serves 620,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Rowridge (Isle Of Wight, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Rowridge transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Rowridge transmitter?
BBC South Today 1.3m homes 4.9%
from Southampton SO14 7PU, 26km north (354°)
to BBC South region - 39 masts.
ITV Meridian News 0.9m homes 3.6%
from Whiteley PO15 7AD, 24km north-northeast (20°)
to ITV Meridian (South Coast) region - 39 masts.
All of lunch, weekend and 50% evening news is shared with all of Meridian plus Oxford
Are there any self-help relays?
| Portsmouth Docks | Transposer | 2 km N city centre | 50 homes Estimate. Group of houses' |
How will the Rowridge (Isle Of Wight, England) transmission frequencies change over time?
| 1950s-80s | 1984-97 | 1997-98 | 1998-2012 | 2012-13 | 2 May 2018 | ||||
| VHF | A K T | A K T | A K T | A K T | W T | ||||
| C3 | BBCtvwaves | ||||||||
| C21 | C4waves | C4waves | C4waves | +BBCB | BBCB | ||||
| C22 | +ArqA | ArqA | |||||||
| C24 | BBC2waves | BBC2waves | BBC2waves | BBCA | BBCA | ||||
| C25 | SDN | SDN | |||||||
| C27 | ITVwaves | ITVwaves | ITVwaves | D3+4 | D3+4 | ||||
| C28 | ArqB | ArqB | |||||||
| C29 | LSO | ||||||||
| C31 | BBC1waves | BBC1waves | BBC1waves | com7 | |||||
| C37 | com8 | ||||||||
| C55tv_off | com7tv_off | ||||||||
| C56tv_off | COM8tv_off |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 7 Mar 12 and 21 Mar 12.
How do the old analogue and currrent digital signal levels compare?
| Analogue 1-4 | 500kW | |
| PSB1||, PSB1≡, PSB2||, PSB2≡, PSB3||, PSB3≡ | (-4dB) 200kW | |
| COM4≡, COM4||, COM5≡, COM5||, COM6≡, COM6|| | (-10dB) 50kW | |
| com7≡ | (-13.1dB) 24.4kW | |
| Mux 1*, Mux 2*, Mux A*, Mux B*, Mux C*, Mux D* | (-14dB) 20kW | |
| com8≡ | (-14.3dB) 18.4kW | |
| LSO≡ | (-17dB) 10kW |
Local transmitter maps
Rowridge Freeview Rowridge DAB Rowridge TV region BBC South Meridian (South Coast micro region)Which companies have run the Channel 3 services in the Rowridge transmitter area
|
|
Thursday, 29 March 2012
J
jb384:24 PM
Gerald C. May: Just purely out of interest although being fully aware that manual tuning will in most cases succeed where auto-tuning fails, this obviously being the reason that you advised John to carry out that procedure, but did you find that in your own case that you also had to use this method? as it shouldn't really have proved as being necessary as that's the whole point about "auto" tuning, being, that you should not require to enter any details into the box whatsoever to receive anything within the coverage area of the transmitter irrespective of whether you are dealing with SD or HD, and with this fact being mostly likely why Humax had told John that the transmitter might be down as its about the only thing that could cause that type of problem, although one that's liable to give rise to suspicion that a problem might exist with the software on that model. (Latest software indicated as version 1.02.20)
Looking forward to your reply.
| link to this comment |
J
John 10:35 PM
jb38:
Perhaps I should explain why I was doing a manual tune. I didn't want any channels other than those from the Rowbridge transmitter. On an auto-tune I was picking up a number of the higher MUXs.
I have previously used a Humax PVR9300, which gave occasional problems with the recording schedule, which Humax put down to having these higher MUXs present. They recommended a manual tune to minimise this problem.
When I spoke to the Humax help-line early yesterday re. my problem with C21, I made them fully aware that I was tuning manually, and that it was the HD channel That I couldn't get.
al tune.
. A manual tune on this PVRmore thanwhich can give erroneous recording times run into timing ppresumably frThis is because on an the Humax PVR93000 recorder many earlier Humaxother channels other than
| link to this comment |
J
John 10:38 PM
Sorry about the rubbish at the bottom of my previous posting, finger trouble!
| link to this comment |
J
jb3811:07 PM
John: To be quite honest about it I wasn't in any way disputing what had been said by anyone, I was simply stating that the procedure used should have been unnecessary to receive an HD channel, however on the basis of what you have said then it now strongly suggests that the reason for you not picking up Ch21 on the manual scan was most likely because you had accidentally omitted to select DVB-T2 during the setting up procedure for the scan, something which the Humax customer advisor you spoke to had possibly overlooked.
| link to this comment |
Friday, 30 March 2012
P
paulw12:46 PM
Hi I seem to be missing bbc channels and a few others in the morning but by the evening they are working. Could any advice be given? Reallign? Upgrade aerial? Or will this sort itself after mid-april
| link to this comment |
J
jamie7:05 PM
Havant
HI PAULW---------what is your address including postcode??? thanks
| link to this comment |
jamie's: mapJ's Freeview map terrainJ's terrain plot wavesJ's frequency data J's Freeview Detailed Coverage
M
MC488:08 PM
@ Paulw. I had channels missing after switchover. I replaced the flylead between the TV and aerial socket with another and the missing channels came back (they were ok elsewhere in the house which was off the same aerial). Doing the same may not cure your problem but it is worth trying.
| link to this comment |
G
Gerald C. May11:45 PM
jb38: I came across this before when someone else asked about the manual tuning procedure,it was not an HD query on that occasion.
The person concerned was unaware that the regions could be selected after the scan. The Humax had selected a stronger Wales Mux instead of England at that time and moved their preferred channels up in 800s.
They wanted to know how to do a manual tune
to get their channels back.
I was just advising John what to do.
Hope this helps.
| link to this comment |
Saturday, 31 March 2012
J
jb3810:02 AM
Gerald C. May: Thank you for clarifying and indeed confirming that you were just advising John on a way to overcome his problem rather than having had to carry out this procedure yourself, my interest purely being for the notebook in case there were any new issues springing up with that particular model that I wasn't aware of, albeit of course if there had been then no doubt postings to this effect would have been seen made on other sites, which according to checks there haven't been.
Thanks again for clarifying the issue.
Regards / jb.
| link to this comment |
S
Sean3:46 PM
Hi all
Since the recent retunes, my HTPC is picking up a bunch of frequencies it shouldn't be for where I am (Gosport - PO12). I'm getting duplicates of all the BBC channels (on the wrong frequency) and various others as well.
From the HTPC logs
482.167 MHz - Duplicates of 602.000 MHz
506.000 MHz - Duplicates of 545.833 MHz
674.000 MHz - Duplicates of 498.000 MHz
Prior to the retune at the start of March, everything was fine, it's only since the new transmitter came into action that all these unwanted entries have started appearing on a scan.
Any ideas?
| link to this comment |
Select more comments
Your comment please