Full Freeview on the Sandy Heath (Central Bedfordshire, England) transmitter
Brian Butterworth first published this on - UK Free TV
Google Streetview | Google map | Bing map | Google Earth | 52.130,-0.242 or 52°7'47"N 0°14'33"W | SG19 2NH |
The symbol shows the location of the Sandy Heath (Central Bedfordshire, England) transmitter which serves 920,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
_______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Sandy Heath transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Sandy Heath transmitter?
BBC Look East (West) 1.0m homes 3.7%
from Cambridge CB4 0WZ, 29km east-northeast (65°)
to BBC Cambridge region - 4 masts.
70% of BBC East (East) and BBC East (West) is shared output
ITV Anglia News 1.0m homes 3.7%
from Norwich NR1 3JG, 119km east-northeast (60°)
to ITV Anglia (West) region - 5 masts.
All of lunch, weekend and 80% evening news is shared with Anglia (East)
How will the Sandy Heath (Central Bedfordshire, England) transmission frequencies change over time?
1965-80s | 1984-97 | 1997-98 | 1998-2011 | 2011-13 | 12 Feb 2020 | ||||
VHF | A K T | K T | K T | W T | W T | ||||
C6 | ITVwaves | ||||||||
C21 | C4waves | C4waves | C4waves | +BBCB | BBCB | ||||
C24 | ITVwaves | ITVwaves | ITVwaves | D3+4 | D3+4 | ||||
C27 | BBC2waves | BBC2waves | BBC2waves | BBCA | BBCA | ||||
C31 | BBC1waves | BBC1waves | BBC1waves | ||||||
C32 | com7 | ||||||||
C33 | SDN | ||||||||
C34 | com8 | ||||||||
C35 | _local | ||||||||
C36 | ArqA | ||||||||
C39 | C5waves | C5waves | |||||||
C43 | _local | ||||||||
C48 | ArqB | ArqB | |||||||
C51tv_off | SDN | ||||||||
C52tv_off | ArqA | ||||||||
C55tv_off | com7tv_off | ||||||||
C56tv_off | COM8tv_off |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 30 Mar 11 and 13 Apr 11.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 1000kW | |
BBCA, D3+4, BBCB | (-7.4dB) 180kW | |
SDN, ARQA, ARQB | (-7.7dB) 170kW | |
com7 | (-13dB) 49.6kW | |
com8 | (-13.1dB) 49.1kW | |
Mux 1*, Mux 2*, Mux A*, Mux B*, Mux C*, Mux D* | (-17dB) 20kW | |
Analogue 5 | (-20dB) 10kW |
Which companies have run the Channel 3 services in the Sandy Heath transmitter area
|
|
Tuesday, 25 September 2012
P
phil8:13 AM
Kettering
MikeG:I have noticed today 25th september real problems on all arials with the yesterdaychannel is there a reason for this.Phil Kettering.
link to this comment |
phil's: mapP's Freeview map terrainP's terrain plot wavesP's frequency data P's Freeview Detailed Coverage
M
MikeG8:48 AM
Getting Ch19 'Yesterday' OK here Phil, can't think of any reason as they are all high power now, unless they're doing maintenance on that mux?
link to this comment |
S
Steve1:23 PM
Cambridge
Retuned several times yesterday (24th) but my BBC stations are going to 800s and sometimes the ITV/C4 ones are going there too but sometimes to the correct place. Tried a manual retune but that still plonks them in the wrong order... 19LG3000 DTV. I get all the stations just not in the correct place. I never had this problem with retuing before... Any ideas? Oh I tried a full factory reset which also didn't make any difference. Am in CB25.
link to this comment |
Steve's: mapS's Freeview map terrainS's terrain plot wavesS's frequency data S's Freeview Detailed Coverage
M
Mick S2:59 PM
For MikeG: from Mick S.
Thank you for your advice .. it worked!
TA!
link to this comment |
M
MikeG3:18 PM
Steve, can't imagine what's happening. If you do a factory reset and then a Manual tune on those channels from Sandy Heath it should clear out all the old channels and put the correct ones in the correct order.
What TV or PVR are you trying to tune?
link to this comment |
S
Steve5:33 PM
Cambridge
Hi MikeG
It's an LG model number 19LG3000 which is a 19 inch digital flat screen TV. Previously everything has been fine at the periodic retunes required but not this time!
link to this comment |
Steve's: mapS's Freeview map terrainS's terrain plot wavesS's frequency data S's Freeview Detailed Coverage
S
Sean Fitzgerald7:37 PM
I have connected a magic eye to a second television to get sky digital from my hd box to that tele.its all connected but the picture is very poor.i believe I have to change the rf output channel but I don't know which channel is best to use in this area.any idea? Mk62py
link to this comment |
J
jb389:32 PM
Sean Fitzgerald: I would keep the channels between 64 - 69, as modulators in most boxes work best in these ranges.
I will say though that Sky HD boxes do have a record of complaints regarding weak modulators, so keep this in mind.
link to this comment |
Wednesday, 26 September 2012
M
MikeG8:04 AM
Steve, regarding your LG model number 19LG3000.
I have downloaded the manual for this and strangely it seems to allow for programs to be in the 800 range, which on most units indicates duplicate TV channels have been saved.
There is a Program Swap option however which may help, but I have a suspicion that the set may need to reboot itself from scratch.
Apparently many TVs and PVRs can crash (after all it's only a computer) and unplugging them from the mains for a few minutes makes them reboot from hardware.
This can cure a myriad of problems. My Toshiba failed to recognise the remote and unplugging it cured it. Worth a try.
link to this comment |
M
MikeG8:06 AM
P.S. You need to actually unplug it; just turning it off at the set doesn't always completely isolate it.
link to this comment |
Select more comments
Your comment please