Full Freeview on the Emley Moor (Kirklees, England) transmitter
 | Google Streetview |  | Google map |  | Bing map |  | Google Earth |  | 53.611,-1.666 or 53°36'41"N 1°39'57"W |  | HD8 9TF |
The symbol shows the location of the Emley Moor (Kirklees, England) transmitter which serves 1,550,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
Are there any planned engineering works or unexpected transmitter faults on the Emley Moor (Kirklees, England) mast?
Emley Moor transmitter - Emley Moor transmitter: Possible effect on TV reception week commencing 22/04/2024 Screen may go black on some or all channels 
_______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Emley Moor transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Emley Moor transmitter?
BBC Look North (Leeds) 1.9m homes 7.4%
from Leeds LS9 8AH, 22km north-northeast (22°)
to BBC Yorkshire region - 56 masts.
ITV Calendar 1.9m homes 7.4%
from Leeds LS3 1JS, 22km north-northeast (16°)
to ITV Yorkshire (Emley Moor) region - 59 masts.
All of lunch, weekend and 80% evening news is shared with Belmont region
Are there any self-help relays?
| Derwent B | Active deflector | 74 homes | |
| Derwent C | Active deflector | (second level) | |
| Dunford Bridge | Active deflector | 14 km S Huddersfield | 15 homes |
| Hmp Leeds | Transposer | 30 homes | |
| Thixendale | Transposer | 25 km ENE York | 40 homes |
How will the Emley Moor (Kirklees, England) transmission frequencies change over time?
| 1956-80s | 1984-97 | 1997-98 | 1998-2011 | 2011-13 | 5 Feb 2020 | ||||
| VHF | B E T | B E T | B E T | B E T | W T | ||||
| C10 | ITVwaves | ||||||||
| C32 | com7 | ||||||||
| C33 | SDN | ||||||||
| C34 | com8 | ||||||||
| C36 | ArqA | ||||||||
| C37 | C5waves | C5waves | |||||||
| C39 | _local | ||||||||
| C41 | C4waves | C4waves | C4waves | BBCB | BBCB | ||||
| C44 | BBC1waves | BBC1waves | BBC1waves | D3+4 | D3+4 | ||||
| C47 | ITVwaves | ITVwaves | ITVwaves | BBCA | BBCA | ||||
| C48 | ArqB | ArqB | |||||||
| C51tv_off | BBC2waves | BBC2waves | BBC2waves | SDN | |||||
| C52tv_off | ArqA | ||||||||
| C55tv_off | com7tv_off | ||||||||
| C56tv_off | LLS |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 7 Sep 11 and 21 Sep 11.
How do the old analogue and currrent digital signal levels compare?
| Analogue 1-5 | 870kW | |
| SDN, ARQA, ARQB, BBCA, D3+4, BBCB | (-7dB) 174kW | |
| com7 | (-12dB) 54.8kW | |
| com8 | (-12.3dB) 51.2kW | |
| Mux 1*, Mux 2*, Mux B*, Mux C* | (-19.4dB) 10kW | |
| Mux A*, LLS | (-22.4dB) 5kW | |
| Mux D* | (-23.4dB) 4kW |
Which companies have run the Channel 3 services in the Emley Moor transmitter area
|
|
Tuesday, 25 September 2012
R
Robert Hill2:15 PM
Peter Hall, can I suggest you read the posting of Dave Lindsay above. It explains the thing to do if you need to scan your TV as he explains Bilsdale all-digital channels will be on much higher power, and you may need to do a manual scan! I know you said about East Yorkshire, but it still applies. Do a manual scan. I suggest.
| link to this comment |
Wednesday, 26 September 2012
M
Mike Roberts 4:54 PM
Wigan
this afternoon here in Aspull Wigan the signal has gone terrible, especially on the bbc not watchable. Is this due to ongoing transmitter works and why are they doing more work.
| link to this comment |
Mike's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
M
Mike Roberts 7:05 PM
Wigan
Everything back up and fine again now here In Aspull Wigan, just the bbc multiplex signal quality fluctuating as it normally dose in bad weather anyway But back to normal here. Must of been the current engineering works that was the problem. Dose anyone know if c48 multiplex will be going to the same strength as the rest of them now Bilsdale has gone over?
| link to this comment |
Mike's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
D
David Parker8:06 PM
Ron Lake
Hi Ron
Have you tried getting the Bilsdale transmitter in your neck of the woods.
I get channel 26 ok but not a lot more.
let me know how you go on
all the best
Dave P
| link to this comment |
Thursday, 27 September 2012
Ron Lake
4:06 AM
Wakefield
4:06 AM
Wakefield
David Parker, At the moment my home is a building site, everything but absolute necessities is in storage and nothing but the kettle, the fridge, the microwave and my computer plus a chair in the place. I will have to look into Bilsdale at some later date, approx 5 weeks to completion they say. Best regards to all contributors.
| link to this comment |
Ron's: mapR's Freeview map terrainR's terrain plot wavesR's frequency data R's Freeview Detailed Coverage
M
Mollly Noler10:21 AM
I live in Hebden bridge and i am using freeview. I have a signal booster and i get 72% signal most of the time. But the picture and sound is broken and pixelated. This is very irritating because i have spent a lot of money on buying the signal booster,new telly, and various leads. But still my TV is tempromental. This is not right ! the old anolog way did not ever do this. please can someone help me because I am missing the shows that I intend to watch and just want to be able to watch tv without any stress.
Thanks Molly
| link to this comment |
Friday, 28 September 2012
J
janet denton12:33 PM
Doncaster
aerial is on roof only ever had problems with interferance before when we had sky tv but we no longer have it.dont know if it s down to weather conditions.
| link to this comment |
janet's: mapJ's Freeview map terrainJ's terrain plot wavesJ's frequency data J's Freeview Detailed Coverage
janet denton: What reception problems are you having? The most likely answer in the area is that your receiver has tuned to the Belmont transmitter instead of Emley Moor and therefore it is this which needs correcting.
| link to this comment |
M
Mike Davison7:23 PM
Not a complaint but an observation since Bilsdale went high power. I use Emley Moor OK but as the quality of signals I get from Bilsdale off the rear of the Emley antenna(Wide band BTW) is good but variable, after an auto re-scan I get the choice of areas to use on my Humax HDR-Fox T2. All well and good you may think. Yes - until I use a red button service when I find that '302' is actually using a Bilsdale channel in the 800 area. Is this a Humax problem or a broadcaster's problem? Until it's sorted I have done a complete factory default, stopped its auto-scan and manually scanned the Emley channels.
| link to this comment |
Saturday, 29 September 2012
C
Colin McDonald10:45 AM
I live within a few miles of Emley Moor and have always had a good signal - strength of 100%, quality 80% or more. Since 12th September, the signal quality (only) has dropped to between 0% and 40%. My main TV can't cope and is unwatchable at certain times of the day (evenings mainly). My computer TV card also struggles to show channels. My cheapo Tesco tv for the kids works perfectly of course!
I haven't yet checked the aerial itself (not having a ladder tall enough or wanting to pay someone to do it for me), but I notice that the NE went digital on the 12th - could there be a connection? Any suggestions as to likely cause before I start spending money?
Many thanks
Colin
| link to this comment |
Select more comments
Your comment please