Full Freeview on the Mendip (Somerset, England) transmitter
 | Google Streetview |  | Google map |  | Bing map |  | Google Earth |  | 51.237,-2.626 or 51°14'12"N 2°37'33"W |  | BA5 3LB |
The symbol shows the location of the Mendip (Somerset, England) transmitter which serves 720,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Mendip (Somerset, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Mendip transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Mendip transmitter?
ITV West Country News (East) 0.9m homes 3.4%
from Bristol BS4 3HG, 23km north (11°)
to ITV West region - 61 masts.
All of lunch, weekend and 50% evening news is shared with West Country (West)
Are there any self-help relays?
| Cheddar | Transposer | 15 km E Weston-super-Mare | 1674 homes |
| Luccombe | Active deflector | 6 km w Minehead | 38 homes |
How will the Mendip (Somerset, England) transmission frequencies change over time?
| 1984-97 | 1997-98 | 1998-2010 | 2010-13 | 2013-18 | 2013-17 | 27 Feb 2018 | |||
| C/D E | E | E | C/D E | C/D E T | W T | W T | |||
| C30 | _local | ||||||||
| C32 | BBCA | ||||||||
| C33 | com7 | com7 | |||||||
| C34 | D3+4 | ||||||||
| C35 | com8 | com8 | |||||||
| C36 | ArqB | ||||||||
| C37 | C5waves | C5waves | |||||||
| C48 | SDN | SDN | SDN | SDN | |||||
| C49tv_off | BBCA | BBCA | |||||||
| C51tv_off | LBS | LBS | |||||||
| C52tv_off | ArqB | ArqB | ArqB | ||||||
| C54tv_off | C4waves | C4waves | C4waves | D3+4 | D3+4 | D3+4 | |||
| C55tv_off | com7tv_off | ||||||||
| C56tv_off | ArqA | ArqA | ArqA | COM8tv_off | |||||
| C58tv_off | BBC1waves | BBC1waves | BBC1waves | BBCB | BBCB | BBCB | |||
| C61 | ITVwaves | ITVwaves | ITVwaves | BBCA | |||||
| C64 | BBC2waves | BBC2waves | BBC2waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 24 Mar 10 and 7 Apr 10.
How do the old analogue and currrent digital signal levels compare?
| Analogue 1-4 | 500kW | |
| Analogue 5 | (-6dB) 126kW | |
| SDN, ARQA, ARQB, BBCA, D3+4, BBCB | (-7dB) 100kW | |
| com7 | (-8.4dB) 72.4kW | |
| com8 | (-8.6dB) 69.1kW | |
| Mux 1*, Mux 2*, Mux A*, Mux B*, Mux C*, Mux D*, LBS | (-17dB) 10kW |
Which companies have run the Channel 3 services in the Mendip transmitter area
|
|
Tuesday, 10 February 2015
MikeP
9:07 PM
9:07 PM
Gareth:
There is no indication that the Mendip transmitter has any problems nor scheduled work being done.
I also use Mendip and in Trowbridge there are no problems being experienced either by me or my neighbours.
It's probably worth checking that all your connections are good.
| link to this comment |
Wednesday, 11 February 2015
G
Gareth10:34 AM
Chippenham
Thanks for the advice, Mike.
This is weird but as suddenly as it started 2 and a bit weeks ago, last night I had no problems with any terrestrial channels. The only variable was rhat last night was warmer.
This morning, so far so good.
Thanks once again
| link to this comment |
Gareth's: mapG's Freeview map terrainG's terrain plot wavesG's frequency data G's Freeview Detailed Coverage
Sunday, 15 March 2015
I'm finding aspects of the revamped site rather difficult to use. The biggest single problem is the "My Freeview" setting page. The site asked me to share my location, which I duly did. However, it didn't work correctly, placing my location in Calne, which I think is about thirty miles by road from my actual location in Bristol. There doesn't seem to be a means to reset it, so I'm stuck with inaccurate information and to view the Mendip page, I have to go through the Transmitters page.
I wanted to look at the Mendip page to see which MUX the Horror Channel is using. It's a good addition to Freeview, having several programmes that I enjoy.
| link to this comment |
Charles's: mapC's Freeview map terrainC's terrain plot wavesC's frequency data C's Freeview Detailed Coverage
Monday, 16 March 2015
J
jb387:05 AM
Charles Stuart: Purely on the subject of the Horror Channel / LCN70, this is transmitted on Mendip's COM6 / 722.0Mhz, if 70 isnt seen on the EPG list then a retune is required to update the listings.
As far as your location problem is concerned, the post code you entered "is" for Calne, the location being close to the Oxford Road / Wood street mini roundabout, the Calne Freeview light / PSB only "relay" transmitter (no COM4/5/6 etc) which is listed as covering that particular area, located at 0.5mls from the post code location.
| link to this comment |
J
jb387:21 AM
Charles Stuart: I just noticed on one of your earlier postings made back in January, that BS15 is listed as the post code area, whereas the latest is SN11, so there has to be an error somewhere along the line.
| link to this comment |
This time I didn't enter a postcode. It simply asked me to share my location, which I did. How do I revert to a manual postcode input?
| link to this comment |
Charles's: mapC's Freeview map terrainC's terrain plot wavesC's frequency data C's Freeview Detailed Coverage
J
jb384:38 PM
Stamford
Charles Stuart: Although, just like yourself, I preferred the previous system rather than this updated one, however the easiest way I found is to click on the "cog wheel" seen on the extreme right hand side of the red header bar at the top of the postings, this will open another screen where you can enter your post code, once entered click on "predict" and that will (or should) have changed your location.
You can check if it has without even typing out another posting, as your new location should be included in the information under "Your comment please".
| link to this comment |
jb38's: mapJ's Freeview map terrainJ's terrain plot wavesJ's frequency data J's Freeview Detailed Coverage
jb38, thanks for the suggestion but it doesn't seem to work. No new screen appears. Perhaps Briantist could set up a nice easy system to change one's location. After all, this site will be really useful when moving house.
| link to this comment |
Charles's: mapC's Freeview map terrainC's terrain plot wavesC's frequency data C's Freeview Detailed Coverage
J
jb388:43 PM
Charles Stuart: Well, Briantist really is the best person to advise on this, as he designed the whole system, but though when you say that No new screen appears, I omitted to mention that the one that allows you to enter your post code will "not" appear if a post code is already stored, which in your case should apply albeit with the incorrect code, the point being that you have to click "clear" to the right hand side of the code that is showing before the one I referred will appear.
Of course it all depends on what system you are using, as I noticed others also experiencing problems since the update, I use Win7 Pro with the browser being Mozilla FF36, but I also tried the same test on an older Win XP Pro PC that I keep a load of technical files stored in and the results were exactly the same as on Win7.
| link to this comment |
Thanks for telling me about "clear". (I use Firefox for Mac and it seems the same as Windows.) I now have a new problem. Instead of getting a map, I get this error message:
Warning: file_get_contents(class_googlemaps.js): failed to open stream: No such file or directory in /home/admintv/public_html/class_googlemaps.php on line 308
| link to this comment |
Charles's: mapC's Freeview map terrainC's terrain plot wavesC's frequency data C's Freeview Detailed Coverage
Select more comments
Your comment please