Full Freeview on the Emley Moor (Kirklees, England) transmitter
Brian Butterworth first published this on - UK Free TV
Google Streetview | Google map | Bing map | Google Earth | 53.611,-1.666 or 53°36'41"N 1°39'57"W | HD8 9TF |
The symbol shows the location of the Emley Moor (Kirklees, England) transmitter which serves 1,550,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
_______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Emley Moor transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Emley Moor transmitter?
BBC Look North (Leeds) 1.9m homes 7.4%
from Leeds LS9 8AH, 22km north-northeast (22°)
to BBC Yorkshire region - 56 masts.
ITV Calendar 1.9m homes 7.4%
from Leeds LS3 1JS, 22km north-northeast (16°)
to ITV Yorkshire (Emley Moor) region - 59 masts.
All of lunch, weekend and 80% evening news is shared with Belmont region
Are there any self-help relays?
Derwent B | Active deflector | 74 homes | |
Derwent C | Active deflector | (second level) | |
Dunford Bridge | Active deflector | 14 km S Huddersfield | 15 homes |
Hmp Leeds | Transposer | 30 homes | |
Thixendale | Transposer | 25 km ENE York | 40 homes |
How will the Emley Moor (Kirklees, England) transmission frequencies change over time?
1956-80s | 1984-97 | 1997-98 | 1998-2011 | 2011-13 | 5 Feb 2020 | ||||
VHF | B E T | B E T | B E T | B E T | W T | ||||
C10 | ITVwaves | ||||||||
C32 | com7 | ||||||||
C33 | SDN | ||||||||
C34 | com8 | ||||||||
C36 | ArqA | ||||||||
C37 | C5waves | C5waves | |||||||
C39 | _local | ||||||||
C41 | C4waves | C4waves | C4waves | BBCB | BBCB | ||||
C44 | BBC1waves | BBC1waves | BBC1waves | D3+4 | D3+4 | ||||
C47 | ITVwaves | ITVwaves | ITVwaves | BBCA | BBCA | ||||
C48 | ArqB | ArqB | |||||||
C51tv_off | BBC2waves | BBC2waves | BBC2waves | SDN | |||||
C52tv_off | ArqA | ||||||||
C55tv_off | com7tv_off | ||||||||
C56tv_off | LLS |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 7 Sep 11 and 21 Sep 11.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-5 | 870kW | |
SDN, ARQA, ARQB, BBCA, D3+4, BBCB | (-7dB) 174kW | |
com7 | (-12dB) 54.8kW | |
com8 | (-12.3dB) 51.2kW | |
Mux 1*, Mux 2*, Mux B*, Mux C* | (-19.4dB) 10kW | |
Mux A*, LLS | (-22.4dB) 5kW | |
Mux D* | (-23.4dB) 4kW |
Which companies have run the Channel 3 services in the Emley Moor transmitter area
|
|
Monday, 16 May 2016
MikeP
2:18 PM
Trowbridge
2:18 PM
Trowbridge
Ed Henderson:
Engineering work has been going on at Emley Moor simnce at least last Thursday, with it being noted that there are likeluy to be some service interruptions. The works being noted above your posting.
By retuning you have lost several of the signals that were available, you would have been better off waiting until the engineering works have been completed.
That is still the case and you should only retune once that work has finished. Check back here to determine if the work has finished, indicated by the engineering works notice not being posted afresh again.
link to this comment |
MikeP's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
J
jb385:36 PM
Ed Henderson: Apart from the answer given by MikeP, the fact of you having mentioned Freesat as well as Freeview rather indicates that the problem referred to might be of a twofold nature, as Freesat is in no way connected with Freeview transmissions.
If by any chance you are connected into a communal aerial / dish system? then your problem is likely down to a defect in the distribution amplifier, the repair of same being the responsibility of the buildings maintenance department.
link to this comment |
Tuesday, 17 May 2016
E
Ed Henderson9:42 AM
jb38: thanks. I'll get in touch with the service management team for my apartment. I am one of 4 flats sharing the communal aerial/satellite dish. I appreciate your advice.
link to this comment |
E
Ed Henderson5:13 PM
Ed Henderson: I now have both Freeview and Freesat reception back, thanks to your help. Much appreciated!
link to this comment |
J
jb388:05 PM
Ed Henderson: Many thanks for the update, really pleased to hear that the problem has now been speedily resolved thanks to your apartment blocks service management team, the nature of certainly not coming into the category of being time wasters!
Pleased to have been of assistance.
link to this comment |
Monday, 6 June 2016
MikeP: I live in Bradford BD5 9EX area and a couple months ago I had a new aerial fitted by a professional engineer and all my Freeview channels were perfect on signal strength 10. I have recently noticed the HD channels have been losing their strength down to 5 or lower. Is there any reason for this? Any transmitter works going on I don't know about. I think my aeriel is pointing to the Idle or Shipley transmitter.
link to this comment |
Stuart's: mapS's Freeview map terrainS's terrain plot wavesS's frequency data S's Freeview Detailed Coverage
B
Betamax_man 11:23 PM
Just lost some channels, signal strength good but 0 signal quality.
link to this comment |
B
Betamax_man 11:37 PM
Signal quality back up to 100%, very unusual.
link to this comment |
M
MikeB11:58 PM
Stuart Swaine: Check your actual transmitter - you might be on Bilsdale, which would give you both excellent covergae, but also a wider number of channels (see digitaluk), or you could be on another transmitter entirely. If your on the right transmitter, check all muxes. Some are weaker than others, but if your signal strength has been cut in half (and remember signal strength should be around 75% - 100% is too high), then its worth tracing the signal back to check you havn't got a problem. Might just be the aerial lead is loose or dodgy in the back of the TV.
link to this comment |
M
MikeB11:59 PM
Betemax man: look at the stuff about the high pressure system - its messing with a lot of peoples reception.
link to this comment |
Select more comments
Your comment please