Full Freeview on the Emley Moor (Kirklees, England) transmitter
Brian Butterworth first published this on - UK Free TV
Google Streetview | Google map | Bing map | Google Earth | 53.611,-1.666 or 53°36'41"N 1°39'57"W | HD8 9TF |
The symbol shows the location of the Emley Moor (Kirklees, England) transmitter which serves 1,550,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
_______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Emley Moor transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Emley Moor transmitter?
BBC Look North (Leeds) 1.9m homes 7.4%
from Leeds LS9 8AH, 22km north-northeast (22°)
to BBC Yorkshire region - 56 masts.
ITV Calendar 1.9m homes 7.4%
from Leeds LS3 1JS, 22km north-northeast (16°)
to ITV Yorkshire (Emley Moor) region - 59 masts.
All of lunch, weekend and 80% evening news is shared with Belmont region
Are there any self-help relays?
Derwent B | Active deflector | 74 homes | |
Derwent C | Active deflector | (second level) | |
Dunford Bridge | Active deflector | 14 km S Huddersfield | 15 homes |
Hmp Leeds | Transposer | 30 homes | |
Thixendale | Transposer | 25 km ENE York | 40 homes |
How will the Emley Moor (Kirklees, England) transmission frequencies change over time?
1956-80s | 1984-97 | 1997-98 | 1998-2011 | 2011-13 | 5 Feb 2020 | ||||
VHF | B E T | B E T | B E T | B E T | W T | ||||
C10 | ITVwaves | ||||||||
C32 | com7 | ||||||||
C33 | SDN | ||||||||
C34 | com8 | ||||||||
C36 | ArqA | ||||||||
C37 | C5waves | C5waves | |||||||
C39 | _local | ||||||||
C41 | C4waves | C4waves | C4waves | BBCB | BBCB | ||||
C44 | BBC1waves | BBC1waves | BBC1waves | D3+4 | D3+4 | ||||
C47 | ITVwaves | ITVwaves | ITVwaves | BBCA | BBCA | ||||
C48 | ArqB | ArqB | |||||||
C51tv_off | BBC2waves | BBC2waves | BBC2waves | SDN | |||||
C52tv_off | ArqA | ||||||||
C55tv_off | com7tv_off | ||||||||
C56tv_off | LLS |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 7 Sep 11 and 21 Sep 11.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-5 | 870kW | |
SDN, ARQA, ARQB, BBCA, D3+4, BBCB | (-7dB) 174kW | |
com7 | (-12dB) 54.8kW | |
com8 | (-12.3dB) 51.2kW | |
Mux 1*, Mux 2*, Mux B*, Mux C* | (-19.4dB) 10kW | |
Mux A*, LLS | (-22.4dB) 5kW | |
Mux D* | (-23.4dB) 4kW |
Which companies have run the Channel 3 services in the Emley Moor transmitter area
|
|
Tuesday, 7 June 2016
B
Betamax_man 12:30 AM
MikeB: thought that would be the problem. I remember years ago I managed to receive NED 1,2&3 from Holland & Zdf from Germany. Those were the days of Analogue TV
link to this comment |
MikeB: I have checked my transmitter details and my HD channels are coming from the North East transmitter which I presume is Bilsdale? All my other std Freeview channels are coming from Yorkshire transmitter Idle/Shipley which are on full strength.
Why aren't the HD channels coming from the Yorkshire transmitter, seems odd.
When I tune my TV I have a region choice but I always select the Yorkshire region.
link to this comment |
R
Richard Cooper10:46 AM
Norwich
Betamax_man : Hi Betamax_man. Were you aware that the Idle transmitter does not carry the COM 7 multiplex, which carries the additional HD channels? Bilsdale does, but at lower power than the main 6 multiplexes, so your tv equipment may not be able to pick up the COM 7 multiplex from Bilsdale because it is transmitted at lower power. Richard, Norwich, 7 June 2016@ 10:45 a.m.
link to this comment |
Richard's: mapR's Freeview map terrainR's terrain plot wavesR's frequency data R's Freeview Detailed Coverage
M
MikeB1:56 PM
Stuart Swaine: Put your postcode into the site, and you'll bring up lots of information about reception in your area, etc. Your postcode shows that Bilsdale is your best bet, and your aerial should be pointing NNE. But you shouldn't be getting HD channels from one transmitter and SD from another! So actually check by looking at your manual tuning setup on your TV - you dont need to tune anything but it will tell you what channel (frequency) your on. Bilsdale BBC1 is on Ch26. Its not impossible to pick up another transmitter with a lower channel number, or some other problem.
Once we know what your tuned to, then we can help sort out if its the right one, etc
link to this comment |
Monday, 13 June 2016
D
Donnybelle 6:51 PM
I live in Doncaster and use Emley moor transmitter, for a few weeks now I have had problems with all programmes on Ch 48 distorting and breaking up, no other channels are affected. I have retuned my Panasonic digibox/recorder numerous times but the problem still persists. Any idea what is wrong?
Thanks for any help you can give me.
link to this comment |
M
MikeB8:12 PM
Donnybelle : Check signal strength - is it too high or low? If its 90% or something, its too high. The Mux is full strength and your using a Panasonic, which is known for its sensitive tuners, so too high isn't a bad guess.
link to this comment |
Wednesday, 22 June 2016
problems in Alfreton, Derbyshire with BBC channels, Emley Moor best option of a poor choice with a 16ft mast and +25 mast amp, there have been a few streets reporting problems, this one is Amber Grove, turning amp down loses all signals almost immediataly
link to this comment |
Sunday, 4 September 2016
L
Linda Tattersfield 6:18 PM
Will the Emley Moor transmitter be upgrading to HD as currently I can't receive check 88 The Craft Channel?
link to this comment |
J
jb388:03 PM
Linda Tattersfield : Emley Moor has already been upgraded to accommodate COM7 and COM8 transmitters, and although the programme referred to has not as yet been added to COM8's listings on this (Briantists) site, the Craft channels website states that its debut date was the 1st of this month.
You will of course have to carry out a retune on your TV or box in order to update the EPG listings. Its also assumed that you are already able to view 111 QVC+HD and 112 QVC Beauty HD?, both programmes broadcast on COM8 HD.
link to this comment |
Wednesday, 14 September 2016
R
Richard Cooper10:24 AM
FAO: Ian from Pinxton, Alfreton, Derbys. According to Digital UK, you should be using the Waltham on the Wolds transmitter in Leicestershire, rather than the Emley Moor transmitter near Huddersfield. Have you tried to use Waltham, because from there you'll receive programmes especially for the East Midlands on BBC1 SD and ITV SD.Richard, norwich.
link to this comment |
Select more comments
Your comment please