Full Freeview on the Rowridge (Isle Of Wight, England) transmitter
Brian Butterworth first published this on - UK Free TV
Google Streetview | Google map | Bing map | Google Earth | 50.676,-1.369 or 50°40'35"N 1°22'7"W | PO30 4HT |
The symbol shows the location of the Rowridge (Isle Of Wight, England) transmitter which serves 620,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Rowridge (Isle Of Wight, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Rowridge transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Rowridge transmitter?
BBC South Today 1.3m homes 4.9%
from Southampton SO14 7PU, 26km north (354°)
to BBC South region - 39 masts.
ITV Meridian News 0.9m homes 3.6%
from Whiteley PO15 7AD, 24km north-northeast (20°)
to ITV Meridian (South Coast) region - 39 masts.
All of lunch, weekend and 50% evening news is shared with all of Meridian plus Oxford
Are there any self-help relays?
Portsmouth Docks | Transposer | 2 km N city centre | 50 homes Estimate. Group of houses' |
How will the Rowridge (Isle Of Wight, England) transmission frequencies change over time?
1950s-80s | 1984-97 | 1997-98 | 1998-2012 | 2012-13 | 2 May 2018 | ||||
VHF | A K T | A K T | A K T | A K T | W T | ||||
C3 | BBCtvwaves | ||||||||
C21 | C4waves | C4waves | C4waves | +BBCB | BBCB | ||||
C22 | +ArqA | ArqA | |||||||
C24 | BBC2waves | BBC2waves | BBC2waves | BBCA | BBCA | ||||
C25 | SDN | SDN | |||||||
C27 | ITVwaves | ITVwaves | ITVwaves | D3+4 | D3+4 | ||||
C28 | ArqB | ArqB | |||||||
C29 | LSO | ||||||||
C31 | BBC1waves | BBC1waves | BBC1waves | com7 | |||||
C37 | com8 | ||||||||
C55tv_off | com7tv_off | ||||||||
C56tv_off | COM8tv_off |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 7 Mar 12 and 21 Mar 12.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 500kW | |
PSB1||, PSB1≡, PSB2||, PSB2≡, PSB3||, PSB3≡ | (-4dB) 200kW | |
COM4≡, COM4||, COM5≡, COM5||, COM6≡, COM6|| | (-10dB) 50kW | |
com7≡ | (-13.1dB) 24.4kW | |
Mux 1*, Mux 2*, Mux A*, Mux B*, Mux C*, Mux D* | (-14dB) 20kW | |
com8≡ | (-14.3dB) 18.4kW | |
LSO≡ | (-17dB) 10kW |
Local transmitter maps
Rowridge Freeview Rowridge DAB Rowridge TV region BBC South Meridian (South Coast micro region)Which companies have run the Channel 3 services in the Rowridge transmitter area
|
|
Wednesday, 10 August 2016
N
Nigel 7:24 PM
Lymington
I'm at SO41 0LH and pick up signal from Rowridge. I used to be able to get Solent News on Channel 7 but now it just says no signal. All other channels work perfectly? TV has been retuned but no difference.
link to this comment |
Nigel's: mapN's Freeview map terrainN's terrain plot wavesN's frequency data N's Freeview Detailed Coverage
Thursday, 11 August 2016
J
jb3812:07 AM
Nigel : Your location is indicated as being completely outwith the coverage area of Rowridges H polarised low powered LSO transmitter, hence the reason why the Multiplex transmitter channel (29) broadcasting this programme is not listed in DUK's reception predictor for your location, the fact of you having previously been able to view this channel being most likely down to favourable reception conditions appertaining to the last time you carried out an auto-tune, a situation which has now changed.
Rather than carrying out a series of auto-tunes in an attempt to recover the channel, go into your TV or boxes tuning menu and select "manual" tune followed by entering 29 into the box, then pausing at this point, i.e: do "not" press search or scan, as this procedure has the effect of making the tuner act like a form of signal meter devoid of reception threshold limits (which applies in auto-tune mode) likewise indicating the level of any signals being received nomatter how low they might be.
Further assistance as required.
link to this comment |
N
Norman Langridge12:16 AM
I can receive Freeview at good signal strength from both Rowridge and Findon transmitters. If I do a manual tune first for Rowridge and then for Findon all the sought for muxes (carrier channels) are listed when I do an aerial signal strength check. However, only the Rowridge transmission data appears in the Electronic Programme Guide, my only source to open a programme. Although the two sources provide identical programmes, having an alternative mux can be useful so why don't the Findon duplicates appear in the EPG in the 800s? Humax tell me they should, but they don't!
link to this comment |
R
Richard Cooper9:24 AM
Norman Langridge: Hi, Norman. It is usually the case that if the electronic programme guide doesn't appear for a particular channel, the multiplex on which it is carried (in your case the Findon multiplex), then the signal strength is not sufficiently high for the tv or set-top box to process it effectively. I am surprised that your Humax contact did not explain this to you when you contacted Humax. Richard, Norwich.
link to this comment |
Friday, 12 August 2016
N
Nigel 8:27 AM
jb38: thanks for your response. Have done as suggested but nothing so,clearly out of area. One more question - does this high pressure weather affect signal? I'm also getting erratic pixaliation - signal quality is 10 on all channels and strength between 7 & 10.
link to this comment |
J
jb389:24 AM
Nigel : Yes, high pressure certainly does have an affect on reception, and in most cases one of a dastardly nature, although occasionally (very) it can be positive by enabling a signal to be received from a transmitter normally just out of range.
I had a quick look at the pressure maps before making this reply, and judging by that seen it would appear that the UK is in for a rough time of it for the whole of next week as far as reception problems are concerned, as a series of waves of high pressure are seen to sweep across most of the UK excluding the Northern areas of Scotland, with the South Western area's being severely affected at times.
Needless to say, high pressure is the most likely reason for the problem mentioned.
link to this comment |
Sunday, 14 August 2016
R
Richard Cooper4:42 PM
Nigel : Hi, Nigel I totally agree with jb38, regarding Solent TV. It is not listed as being receivable at your location. On the other hand, BBC Radio Solent should be receivable at yours, because that is transmitted on a high power multiplex. The Freeview channel number for BBC Radio Solent is 722 for you, should you wish to hear local news through your television set. Richard, Norwich.
link to this comment |
R
Richard Cooper4:46 PM
Tony Dix: Hi, Tony. Remember that COM5 is 6 decibels lower on its horizontally polarised signal compared to multiplexes PSB1 PSB2 and PSB3!!! Richard, Norwich.
link to this comment |
Tuesday, 23 August 2016
M
Margaret Baker10:46 AM
Every night at precisely 1am I lose the TV and get a No Signal message. Does the transmitter go to reduced power or what?
link to this comment |
S
StevensOnln111:30 AM
Margaret Baker: Freeview transmitters do not reduce their broadcast power overnight. If it is happening at the same time each night then you are likely suffering from electrical interference caused by something operating on a timer switch.
link to this comment |
Select more comments
Your comment please