Full Freeview on the Hannington (Hampshire, England) transmitter
Brian Butterworth first published this on - UK Free TV
Google Streetview | Google map | Bing map | Google Earth | 51.308,-1.245 or 51°18'28"N 1°14'43"W | RG26 5UD |
The symbol shows the location of the Hannington (Hampshire, England) transmitter which serves 470,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Hannington (Hampshire, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Hannington transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Hannington transmitter?
BBC South Today 1.3m homes 4.9%
from Southampton SO14 7PU, 46km south-southwest (194°)
to BBC South region - 39 masts.
ITV Meridian News 0.9m homes 3.4%
from Whiteley PO15 7AD, 48km south (179°)
to ITV Meridian/Central (Thames Valley) region - 15 masts.
Thames Valley opt-out from Meridian (South). All of lunch, weekend and 50% evening news is shared with all of Meridian+Oxford
How will the Hannington (Hampshire, England) transmission frequencies change over time?
1984-97 | 1997-98 | 1998-2012 | 2012-13 | 18 Apr 2018 | |||||
E | E | E | B E T | W T | |||||
C32 | com7 | ||||||||
C34 | com8 | ||||||||
C35 | C5waves | C5waves | |||||||
C39 | BBC1waves | BBC1waves | BBC1waves | +BBCB | BBCB | ||||
C40 | SDN | ||||||||
C41 | SDN | ||||||||
C42 | ITVwaves | ITVwaves | ITVwaves | D3+4 | D3+4 | ||||
C43 | ArqA | ||||||||
C44 | ArqA | ||||||||
C45 | BBC2waves | BBC2waves | BBC2waves | BBCA | BBCA | ||||
C46 | ArqB | ||||||||
C47 | ArqB | ||||||||
C51tv_off | _local | ||||||||
C55tv_off | com7tv_off | ||||||||
C56tv_off | COM8tv_off | ||||||||
C66 | C4waves | C4waves | C4waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 8 Feb 12 and 22 Feb 12.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 250kW | |
Analogue 5 | (-6.2dB) 60kW | |
BBCA, D3+4, BBCB | (-7dB) 50kW | |
com7 | (-8.3dB) 36.7kW | |
com8 | (-9.8dB) 26.2kW | |
SDN, ARQA, ARQB | (-10dB) 25kW | |
Mux 1*, Mux 2*, Mux A*, Mux B* | (-11dB) 20kW | |
Mux C*, Mux D* | (-14dB) 10kW |
Which companies have run the Channel 3 services in the Hannington transmitter area
|
|
Thursday, 24 May 2018
S
StevensOnln112:29 PM
Adrian Jones & Michael Purches: According to the post which has appears below yours, there was engineering work taking place at Hannington overnight.
link to this comment |
Saturday, 26 May 2018
D
Dre5:05 PM
So after reading the responses on here I went up into my loft to check out what Amplifier I had.
This amplifier is used as a distribution amp as it sends the signal to 3 TV's
It is a Labgear LDL204 4G 4 Way, Freq. range UHF: 470 - 790MHz, Gain per port: 8dB, Noise figure: 3.5dB, with 4G filtering on DTV input.
I think my biggest problem may be my antenna as it looks like a standard Yagi with 18 directors So probably has too much gain for the strength of the signal I should be getting.
Maybe I should go for something like a Labgear LPCT Compact Log Periodic?
Anyone on here proficient in the dark arts of aerial selection?
Also after the recent works on the hannington transmitter I seem to be getting a much better signal on the com 7 mux with 85% signal and 60ish quality, but the quality seems to vary quite wildly.
link to this comment |
M
MikeB8:41 PM
Dre: if your getting 85% strength and 60% quality, that's screaming that your signal is too strong. So why bother to go on the roof to fit another aerial, when you are boosting your signal? Either perhaps bypass the amp, and see if you can distribute via another non boosting route, or just get some attenuated and kill the signal at the tv end - cheaper and easier.
link to this comment |
Sunday, 27 May 2018
D
Dre8:18 PM
Well for me to change the antenna is not a problem, and the labgear compact is only 10. So unless I can get another F-type connector distribution amp for less than 10, or 'some attenuated'(I have no idea what this is) for 3 TVs for less than 10, the antenna would seem the obvious choice.
link to this comment |
S
StevensOnln110:52 PM
Dre: Attenuators are small devices which plug inline with the coax cable going in to the TV's aerial input and reduce the signal strength. They can be bought for a few pounds on Amazon.
link to this comment |
Wednesday, 30 May 2018
D
Dre2:20 PM
Hi, so I have changed the antenna for the Labgear LPCT Compact Log and that didn't reduce the signal enough, so I got an adjustable attenuator and fitted it straight into the back of the Youview Box.
Now as MikeP suggested I have set the attenuator so I have 80% on my strongest Mux which is PSB3
Now I get strength and quality different across the muxes ie.
PSB1 - 65St - 100Q
PSB2 - 75St - 100Q
PSB3 - 80St - 100Q
Com4 - 60St - 100Q
Com5 - 55St - 100Q
Com6 - 40St - 100Q
Com7 - 16St - 3Q
Com8 - 0St - 0Q
My distribution amp has a built in filter that removes any signals from Lte 800 4G
Now when I reduce the amount of attenuation All but Com 7 and 8 will go to 90St and 100Q
Com7 is 55St and 45Quality and Com 8 sits at 35St and 70Quality
This would seem to be the sweet spot.
I still don't understand why Com7 and 8 are so much worse than all the others tho.
link to this comment |
Sunday, 3 June 2018
C
Chris.SE3:09 AM
Dre:
The probable reason COMs 7/8 are worse is likely to be due to interference from Crystal Palace.
As you have an adjustable attenuator, I would try reducing the attenuation a bit further. There is nothing wrong with 100% signal on your strongest muxes PROVIDING the Quality does not reduce on any of the muxes (and of course you are not experiencing any pixellation or sound breakup issues!) Bear in mind you may still see those problems on COMs 7/8 from time to time anyway due to interference.
link to this comment |
A
anyone9:42 PM
Dre: Your Labgear LPCT Compact Log has a low front to back ratio of 17 dB.
It seems to me a high front to back ratio might be the way to reduce the interference from Crystal Palace referred to by Chris.SE.
According to its data sheet, the Vision V10-36FL Log has a front to back ratio of >34dB.
Maybe that's the way to go.
link to this comment |
D
Dre11:23 PM
I'm thinking maybe I'll angle my antenna a little more to the south. That may reduce the signal and the interference? I think its probably worth a try anyway.
link to this comment |
D
Dre11:28 PM
Maybe I could angle my antenna a little more to the south. It may have a double positive effect, reducing the signal from Hannington so I need less or no attenuation, plus it may reduce the signal from Crystal palace enough to eliminate the interference. Gotta be worth a try right? I'll have a go tomorrow. Before I go buying another antenna.
link to this comment |
Select more comments
Your comment please