Full Freeview on the Tacolneston (Norfolk, England) transmitter
 | Google Streetview |  | Google map |  | Bing map |  | Google Earth |  | 52.518,1.139 or 52°31'6"N 1°8'22"E |  | NR16 1DW |
The symbol shows the location of the Tacolneston (Norfolk, England) transmitter which serves 330,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Tacolneston (Norfolk, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Tacolneston transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Tacolneston transmitter?
BBC Look East (East) 0.8m homes 3.2%
from Norwich NR2 1BH, 16km northeast (37°)
to BBC East region - 27 masts.
70% of BBC East (East) and BBC East (West) is shared output
ITV Anglia News 0.8m homes 3.2%
from NORWICH NR1 3JG, 16km northeast (38°)
to ITV Anglia (East) region - 26 masts.
All of lunch, weekend and 80% evening news is shared with Anglia (West)
Are there any self-help relays?
| Gt Yarmouth | Transposer | 1 km S town centre | 30 homes |
| Lowestoft (2) | Transposer | Rotterdam Rd | 125 homes |
How will the Tacolneston (Norfolk, England) transmission frequencies change over time?
| 1950s-80s | 1984-97 | 1997-98 | 1998-2011 | 2011-13 | 2013-18 | 2013-17 | 17 Jul 2018 | ||
| VHF | C/D E | C/D E | C/D E | E | E T | W T | W T | ||
| C3 | BBCtvwaves | ||||||||
| C31 | com7 | com7 | |||||||
| C32 | _local | ||||||||
| C37 | com8 | com8 | |||||||
| C39 | +ArqB | +ArqB | ArqB | ||||||
| C40 | BBCA | ||||||||
| C42 | SDN | SDN | SDN | SDN | |||||
| C43 | D3+4 | ||||||||
| C45 | ArqA | ArqA | ArqA | ArqA | |||||
| C46 | BBCB | ||||||||
| C50tv_off | BBCB | BBCB | |||||||
| C52tv_off | C5waves | C5waves | |||||||
| C55tv_off | BBC2waves | BBC2waves | BBC2waves | -BBCA | -BBCA | -BBCA | com7tv_off | ||
| C56tv_off | COM8tv_off | ||||||||
| C57tv_off | LNR | LNR | |||||||
| C59tv_off | ITVwaves | ITVwaves | ITVwaves | -D3+4 | -D3+4 | -D3+4 | |||
| C62 | BBC1waves | BBC1waves | BBC1waves | BBCB | |||||
| C65 | C4waves | C4waves | C4waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 9 Nov 11 and 23 Nov 11.
How do the old analogue and currrent digital signal levels compare?
| Analogue 1-4 | 250kW | |
| SDN, ARQA, ARQB, BBCA, D3+4, BBCB | (-4dB) 100kW | |
| com7 | (-9.6dB) 27.4kW | |
| com8 | (-10.2dB) 24kW | |
| Mux 1*, Mux 2*, LNR | (-14dB) 10kW | |
| Mux A*, Mux B*, Mux C*, Mux D* | (-17dB) 5kW | |
| Analogue 5 | (-18dB) 4kW |
Local transmitter maps
Tacolneston Freeview Tacolneston DAB Tacolneston TV region BBC East Anglia (East micro region)Which companies have run the Channel 3 services in the Tacolneston transmitter area
|
|
Tuesday, 3 July 2018
D
DJB11:23 PM
Hardy: I do understand that these are on lower power but my TV tuner using the loop through from the box manages to show the Com7 and Com 8 channels without any problems.
I recall that when the power levels were much lower a few years back I'd get some pixellation on some of the channels from this transmitter.
Today when I get a constant clean picture on the TV and none at all from the box is confusing. It's been suggested that the amplifier I am using could be the issue, but surely it would be a problem for the TV tuner and the Youview tuner.
Aren't the power levels on Com7 and Com8 far higher than the power levels we had prior to switch off of the analogue channels? The steady picture I get through the TV suggests that they are and that the tuner in these Youview boxes are the main issue.
| link to this comment |
Wednesday, 4 July 2018
H
Hardy8:20 AM
I'm not sure about the power of COM7/ 8 after analogue switch off . I know its now 18 killowatts . wheras the main channels are 100KW. The local Norwich channel comes through fine on 10Kw because it is standard definition. A stronger signal is needed for proper reception of HD. I agree that the youview boxes are less sensitive than many tvs . But it can be tricky to get the right degree and type of amplification that would fix it. The "proper" technical solution is a better aerial that is sensitive to com7/8 . The super solution is the use of two aerials one of which is filtered or sized to just pick up com7/8 . But is the expense and bother worth it.? Especially as in the future com7 and 8 are likely to be discontinued.
| link to this comment |
S
StevensOnln110:08 AM
Hardy: COM7 & COM8 did not come into existence until several years after analogue TV was switched off. According to Digital UK, COM7 & COM8 are both broadcast at just over 18kW from Tacolneston. The local mux uses QPSK modulation which is much more resilient but comes at a cost of providing much less capacity and therefore is able to broadcast at a much lower power level than the main muxes.
| link to this comment |
Thursday, 5 July 2018
H
Hardy8:01 AM
yes Stevens . the point being that before the recent change they were 27.4kw and 24kw .At the new level of 18kw they are a bit harder to receive in fringe areas.
| link to this comment |
Monday, 9 July 2018
P
Paul White2:48 PM
Wymondham
4.5 miles from Tacolneston transmitter and no longer able to receive BBC4 HD on FreeView.
| link to this comment |
Paul's: mapP's Freeview map terrainP's terrain plot wavesP's frequency data P's Freeview Detailed Coverage
S
StevensOnln14:09 PM
Paul White: It's highly likely that you're getting interference from other distant transmitters that you would not normally be able to receive, due to the current atmospheric conditions caused by the hot weather. Do not attempt to retune.
| link to this comment |
Tuesday, 10 July 2018
H
Hardy9:45 AM
Paul. I assume you retuned your tv after the frequency change of june6th? You are so close to the transmitter even a small indoor aerial should work. Though indoors where the aerial is placed can be quite critical . I don't think interference from other transmitters would be strong enough to cause problems. Outdoor aerials are always preffered (in youre case a short log type should be ideal) . In the loft being a second choice to place it . With such a strong signal an attenuator (signal reduction device) may be needed inline with the cable.
| link to this comment |
Monday, 16 July 2018
M
Mardler 10:14 AM
Hardy and Stevens,
COM7 & 8
This is news to me. I only ever saw both being broadcast at 24Kw never18! My sources were this page and a more reliable and up to date one. Had I see 18 I would immediately have complained to my MP.
Stevens, you say the new mix is able to broadcast at a much lower power level - you mean is restricted to a much lower power level not able. It is transmitted power that matters.
It is unbelievable that a main HD channel is transmitted at such low power. No wonder people are annoyed.
| link to this comment |
M
Mardler 10:19 AM
Predictive errors in last post: seen and mux - unable to edit!
Please! For the umpteenth time, upgrade your forum to a modern user friendly, format.
| link to this comment |
M
Mardler 10:24 AM
If these muxes are being broadcast at 18Kw shouldn't you update your table as it still shows 27.4 and 24?
| link to this comment |
Select more comments
Your comment please