Full Freeview on the Bluebell Hill (Medway, England) transmitter
Google Streetview | Google map | Bing map | Google Earth | 51.324,0.520 or 51°19'25"N 0°31'13"E | ME5 9RD |
The symbol shows the location of the Bluebell Hill (Medway, England) transmitter which serves 200,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Bluebell Hill (Medway, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Bluebell Hill transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Bluebell Hill transmitter?
![regional news image](/styles/images/regionalnews/302x152/bbc-south-east-today.jpg)
BBC South East Today 0.8m homes 3.2%
from Tunbridge Wells TN1 1QQ, 28km southwest (218°)
to BBC South East region - 45 masts.
![regional news image](/styles/images/regionalnews/302x152/itv-meridian.jpg)
ITV Meridian News 0.7m homes 2.7%
from Maidstone ME14 5NZ, 5km south-southeast (155°)
to ITV Meridian (East) region - 36 masts.
All of lunch, weekend and 50% evening news is shared with all of Meridian plus Oxford
How will the Bluebell Hill (Medway, England) transmission frequencies change over time?
1984-97 | 1997-98 | 1998-2012 | 2012-13 | 19 Jul 2018 | |||||
E | E | E | W T | W T | |||||
C21 | _local | ||||||||
C28 | _local | ||||||||
C32 | com7 | ||||||||
C34 | com8 | ||||||||
C39 | +ArqA | ||||||||
C40 | BBC1waves | BBC1waves | BBC1waves | +BBCB | SDN | ||||
C43 | ITVwaves | ITVwaves | ITVwaves | D3+4 | ArqA | ||||
C45 | SDN | BBCB | |||||||
C46 | BBC2waves | BBC2waves | BBC2waves | BBCA | ArqB | ||||
C54tv_off | ArqB | ||||||||
C55tv_off | com7tv_off | ||||||||
C56tv_off | COM8tv_off | ||||||||
C65 | C4waves | C4waves | C4waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 13 Jun 12 and 27 Jun 12.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 30kW | |
SDN, ARQA, ARQB, BBCA, D3+4, BBCB | (-1.8dB) 20kW | |
com8 | (-7.8dB) 5kW | |
com7 | (-8.1dB) 4.7kW | |
Mux 1*, Mux B*, Mux C*, Mux D* | (-10dB) 3kW | |
Mux 2*, Mux A* | (-11.8dB) 2kW |
Local transmitter maps
Bluebell Hill Freeview Bluebell Hill DAB Bluebell Hill TV region BBC South East Meridian (East micro region)Which companies have run the Channel 3 services in the Bluebell Hill transmitter area
|
|
Tuesday, 16 October 2018
MikeP
11:24 AM
11:24 AM
Chris:
I suspect that you are misinterpreting what has been said by myself, MikeB and many others. Having too little signal is always likely to present intermittent reception problems. Having too much signal for the tuner to cope with will also present as intermittent reception problems, often reported bt the TV as a message saying 'No Signal' which is actually incorrect. What happens is that the tuner becomes overloaded with signal and cannot process the data into a usable data stream that can be recognised by the subsequent signal processing stage of the receiver. When that happen, you get the false, 'No Signal' message displayed as it thinks there is no signal because it cannot process it properly. As the signal strength will inevitably vary throughout the day and from day to day with variations in the atmospheric propogation conditions the actual signal strength arriving at the aerial will vary considerably. So the aim is to ensure that the actual received signals are of sufficient strength to reliably give a good reception and decoding at all times, hence the minimum quoted of 60%, and yet not be too strong as to cause tuner overload despite the variation in strength, hence the top limit quoted as being 85%. That allows for the varying strength of the signal to give an apparently constant reception. The quality measure is not a good quide when all is working well, it only comes into the picture when the signal is too low or too high for the decoding to be having trouble in sorting out the data, then the quality measure can assist. Note that the decoding systems include factors such as error correction to make it quite robust in normal circumstances, but even that cannot cope with very high levels of data errors.
So the recommended signal strengths are 60% as a minimum and 85% as a maximum are to allow for variations in the received signal strength and the variations in sensitivity between not only manufacturers but also individual examples fitted by the same manufacturer to different models. The same applies to PVRs as well.
link to this comment |
Thursday, 18 October 2018
C
Chris.SE3:18 AM
MikeP:
As a qualified engineer, please don't talk to me as though I'm a complete idiot and don't understand how digital (or other) signals work, varying signal strength, front end overload, error correction and etc.
Quote "The quality measure is not a good quide when all is working well, it only comes into the picture when the signal is too low or too high for the decoding to be having trouble in sorting out the data, then the quality measure can assist."
Precisely, so if a tuner is showing strength 95%, and zero bit error rate or 100% quality, and there is no picture or sound issues under normal conditions (no strong dx lift), then there should be no problems.
IMHO, you should not make statements such as - quote "They need to be between 60% and 85%, any more will cause significant problems that can be cured by fitting an attenutator ............."
If you are commenting in this way it should be qualified ie. "Ideally IMO, aim for signal between 60% and 85%, significantly more might cause noticeable problems that are often cured by fitting an attenuator ..........."
It seems we shall have to agree to disagree.
link to this comment |
MikeP
10:41 AM
10:41 AM
Chris SE:
I am very well qualified as I spent 50 years working in the TV inductry in technical roles, as a Senior Technical Trainer for a large TV rental company before moving to similar roles in other related companies. I also have a Masters Degree in Electronics and Physics. So I am very well qualified to make the comments I do based on both technical knowledge and understanding as well as relevant experience.
Further, you miss the point that we do not know what equipment is being used by the person reporting a problem. So we need a general approach unless a specific question is asked. Further, due to the varying attenuation by the atmosphere we do not know how much their signal varies, as it does on every receiver, so we need to give guidance in such a way as to avoiud the overload conditions whilst still meeting the minimum requirement levels needed by tuners.
I know of instances where a 90% signal strength gives intermittent problems. My younger brother, also an electronics engineer with higher degrees, was suffering from just such a problem and when we checked the strength it was in the 90% range and varying. So a 3dB attenuator was fitted, reducing the signal levels to 84% on most multiplexes and that cured the intermittent sound problem. A family friend was having problems with apparent loss of some channels. All the usual checks were made of the aerial system and the only feature visible was the strength being 96% on the worst affected mux. A 6dB attenuator solved that with a signal strength now showing as 86%.
You asked why I and others so often quote the 60%-85% range, they are examples of why. You assumed I didn't know what I was talking about so I have now corrected your understanding.
QED.
link to this comment |
Monday, 22 October 2018
C
Chris.SE10:12 PM
MikeP:
Quote - "You assumed I didn't know what I was talking about so I have now corrected your understanding. "
I did nothing of the sort, NOR did I state that, NOR did I state that there were not cases where signals greater than 85% gave problems.
You made a statement in another post elsewhere that "any more WILL cause significant problems".
That is patently NOT true, whilst it MIGHT cause a problem in some cases, it won't in all cases.
It's your definitive wording that I'm quibbling with.
I'm certain that there are plenty of others who have posted here (and no doubt elsewhere) that have signal strengths greater than 85% with no issue.
Your post on Tuesday, 16 October 2018 11:24 AM was posted in a tone that assumed I did not understand anything to do with the issues involved, as does your last post. That is arrogant. Nor am I missing any points. I am also a degree qualified engineer (as I indicated in my previous post) with a similar number of years experience with TV and in other electrical & electronic fields.
As stated, I just don't agree with your definitive wording, IMHO you should use that word MIGHT not WILL, "simples" as the saying goes. Now doubt you will carry on using wording of your choice.
Having now thrashed this to death, Endof.
link to this comment |
Tuesday, 23 October 2018
MikeP
11:02 AM
11:02 AM
ChrisSE:
I wonder where you got those quotes from as they do not apear in any of my postings - I am careful not to be so deliberately rude!
Your understanding is different from mine, so please stop trying to change physics.
link to this comment |
Friday, 26 October 2018
C
Chris.SE1:49 AM
MikeP:
I don't believe I've been rude at all, just because I didn't agree with your choice of words.
I have quoted from your posts.
Try reading your post on Monday, 15 October 2018 10:47 AM on the Sudbury transmitter page -
Quote "So start by checking the indicated signal strengths on all the multiplexes. They need to be between 60% and 85%, any more will cause significant problems that can be cured by fitting an attenutator into the aerial cable behind the set ........."
Other "quotes" are from your posts on this transmitter board.
I notice some of your more recent posts have been worded in a way I totally agree with.
As I've said, this has been thrashed to death, so we'll have to agree to disagree.
However one query - what equipment was your younger brother using that had the intermittent sound problem?
link to this comment |
MikeP
11:01 AM
11:01 AM
ChrisSe:
We disagree. End of. Please don't mislead anyone further.
link to this comment |
C
Chris11:38 PM
Chris.SE & MikeP:
Why does my signal drop out when vehicles pass by my house? I live on a busy road and it is worse at rush hour or when a bus goes by. I live within 2km of the transmitter and my signal strength is 70 to 90%. Signal quality 90 to 100% but drops off when traffic passes. Often goes black and displays "No Signal" message. Didn't happen before changes on 19th July 2018. What has changed to cause this? Thanks
link to this comment |
Saturday, 27 October 2018
MikeP
10:52 AM
10:52 AM
Chris:
We need a full post code so that we can see exactly where you are in relation to the transmitter and road. Is the road level above your house?
link to this comment |
Monday, 29 October 2018
C
Chris8:19 PM
Chatham
My postcode is ME5 8UN. The house is at the same level as the road.
link to this comment |
Chris's: mapC's Freeview map terrainC's terrain plot wavesC's frequency data C's Freeview Detailed Coverage
Select more comments
Your comment please