Full Freeview on the Sandy Heath (Central Bedfordshire, England) transmitter
 | Google Streetview |  | Google map |  | Bing map |  | Google Earth |  | 52.130,-0.242 or 52°7'47"N 0°14'33"W |  | SG19 2NH |
The symbol shows the location of the Sandy Heath (Central Bedfordshire, England) transmitter which serves 920,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Sandy Heath (Central Bedfordshire, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Sandy Heath transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Sandy Heath transmitter?
BBC Look East (West) 1.0m homes 3.7%
from Cambridge CB4 0WZ, 29km east-northeast (65°)
to BBC Cambridge region - 4 masts.
70% of BBC East (East) and BBC East (West) is shared output
ITV Anglia News 1.0m homes 3.7%
from Norwich NR1 3JG, 119km east-northeast (60°)
to ITV Anglia (West) region - 5 masts.
All of lunch, weekend and 80% evening news is shared with Anglia (East)
How will the Sandy Heath (Central Bedfordshire, England) transmission frequencies change over time?
| 1965-80s | 1984-97 | 1997-98 | 1998-2011 | 2011-13 | 12 Feb 2020 | ||||
| VHF | A K T | K T | K T | W T | W T | ||||
| C6 | ITVwaves | ||||||||
| C21 | C4waves | C4waves | C4waves | +BBCB | BBCB | ||||
| C24 | ITVwaves | ITVwaves | ITVwaves | D3+4 | D3+4 | ||||
| C27 | BBC2waves | BBC2waves | BBC2waves | BBCA | BBCA | ||||
| C31 | BBC1waves | BBC1waves | BBC1waves | ||||||
| C32 | com7 | ||||||||
| C33 | SDN | ||||||||
| C34 | com8 | ||||||||
| C35 | _local | ||||||||
| C36 | ArqA | ||||||||
| C39 | C5waves | C5waves | |||||||
| C43 | _local | ||||||||
| C48 | ArqB | ArqB | |||||||
| C51tv_off | SDN | ||||||||
| C52tv_off | ArqA | ||||||||
| C55tv_off | com7tv_off | ||||||||
| C56tv_off | COM8tv_off |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 30 Mar 11 and 13 Apr 11.
How do the old analogue and currrent digital signal levels compare?
| Analogue 1-4 | 1000kW | |
| BBCA, D3+4, BBCB | (-7.4dB) 180kW | |
| SDN, ARQA, ARQB | (-7.7dB) 170kW | |
| com7 | (-13dB) 49.6kW | |
| com8 | (-13.1dB) 49.1kW | |
| Mux 1*, Mux 2*, Mux A*, Mux B*, Mux C*, Mux D* | (-17dB) 20kW | |
| Analogue 5 | (-20dB) 10kW |
Which companies have run the Channel 3 services in the Sandy Heath transmitter area
|
|
Sunday, 24 February 2019
C
Chris.SE1:44 AM
Daventry
Earl Thomson:
It looks as though you are in a borderline reception area. DigitalUK doesn't have any predicted Freeview reception for your postcode. This site seems to think your transmitter should be Oxford which is stupid because a terrain plot clearly shows two hills in the line of sight, the first being about 1-2km away, the other around 7km IIRC. I can't easily get a terrain plot for Sandy Heath but looking at the coverage map and street view I'd guess it has a better chance, so a good aerial installation would be a must.
BUT as it's going to be borderline reception it's going to be very vulnerable to interference from long distance DX interference when weather conditions (usually large high pressure systems) allow as we have at the moment.
If you find your Freeview reception is too unreliable then I'd resort to Satellite. I don't know what sort of LNB you have on your Sky dish, but if there's a spare output you ought to be able to get Freesat with a Freesat box, or your TV may even have an in-built Satellite receiver.
| link to this comment |
Chris.SE's: mapC's Freeview map terrainC's terrain plot wavesC's frequency data C's Freeview Detailed Coverage
Monday, 25 February 2019
H
hardy8:28 PM
Earl Thompson . I agree with Chris . You will definitely need a good aerial amplifier near the aerial . Even then you will l be susceptible to some continental interference . I would recommend going to freesat for a reliable signal. You could have the SKY dish LNB changed to have an output to connect the freesat receiver too or install a separate dish just for freesat.
| link to this comment |
Tuesday, 26 February 2019
MikeP
9:21 AM
9:21 AM
hardy:
Installing a separate dish would require planning permission. Only one dish is allowed on any property without planning permission, adding a second needs an appropriate application to be submitted.
| link to this comment |
Thursday, 28 February 2019
H
hardy9:06 PM
two aerials are allowed in most cases . normally these will be a terrestrial and a satellite types . But can be two dishes .
you can have upto four on a large building over 15 metres high !
| link to this comment |
Friday, 1 March 2019
MikeP
10:43 PM
10:43 PM
Hardy et al:
Te planning rules are set out clearing on a P{DF that can be downloaded from 62989 SATELLITE BKLT COVER
| link to this comment |
Tuesday, 12 March 2019
12:57 PM
Wisbech
For the last 2 weeks my reception has been atrocious. I cannot watch any channels as they keep breaking up all time. I have reset time and time again with no change
I keep getting 'your signal is weak' come up on the television.
Is there a problem at your end?
My address is Bunkers Hill, Wisbech St Mary Cambs PE13 4AQ
Thank you
| link to this comment |
Terry's: mapT's Freeview map terrainT's terrain plot wavesT's frequency data T's Freeview Detailed Coverage
S
StevensOnln11:38 PM
Terry Tibbs : There are no faults showing for the Sandy Heath transmitter (this website is independent and has no connection with the transmitter company or any broadcaster). Have you checked for any loose or damaged cables or connections behind your TV? Retuning will not fix a problem with weak signal and often makes it worse, as you are just deleting all of your correctly tuned channels and searching for them again.
| link to this comment |
Wednesday, 13 March 2019
C
Chris.SE4:26 PM
Terry Tibbs:
It is possible that your "previous" reception difficulties may have been as a result of "interference" from other transmitters (including continental) due to the high pressure weather system(s) that we've had of late, but that should have cleared up by now. If you are still having problems you should do as suggested by StevensOnln1.
If that doesn't resolve the problem you may need to check your aerial and downlead, including making sure the aerial has not moved in the high winds.
| link to this comment |
Thursday, 14 March 2019
B
Brian2:13 PM
I have a Desktop PC fitted with twin channel freeview card. and a Hauppauge WinTV v8 program. I have carried out several re-tunes and am missing a couple of channels, which I thought were on 722 MHz frequency. Investigation has shown that 722 MHz is no longer used and is replaced by 594MHz.
however, as mentioned, several scans (retunes) has not found 594 MHz
(The others I'm interested in are ok ie 498, 522, 690 & 714)
What could be the answer ??//
Regards Brian
| link to this comment |
Brian: I'm not sure as I have version 8.5 installed, and I'm in London where there have been fewer changes for 700MHz clearance.
So, which you pick DVB-T2 and UK in the tuner, don't pick your transmitter, stay on the genertic one. The 17 Jul 2018 chnages moved ArqA from the old C52 to C36.
| link to this comment |
Select more comments
Your comment please