Full Freeview on the Malvern (Worcestershire, England) transmitter
Google map | Bing map | Google Earth | 52.116,-2.331 or 52°6'56"N 2°19'53"W | WR14 4AD |
The symbol shows the location of the Malvern (Worcestershire, England) transmitter which serves 58,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
_______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
The Malvern (Worcestershire, England) mast is a public service broadcasting (PSB) transmitter, it does not provide these commercial (COM) channels: .
If you want to watch these channels, your aerial must point to one of the 80 Full service Freeview transmitters. For more information see the will there ever be more services on the Freeview Light transmitters? page.
Which Freeview channels does the Malvern transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
The Malvern (Worcestershire, England) mast is a public service broadcasting (PSB) transmitter, it does not provide these commercial (COM) channels: .
If you want to watch these channels, your aerial must point to one of the 80 Full service Freeview transmitters. For more information see the will there ever be more services on the Freeview Light transmitters? page.
Which BBC and ITV regional news can I watch from the Malvern transmitter?
![regional news image](/styles/images/regionalnews/302x152/bbc-midlands-today.jpg)
BBC Midlands Today 2.9m homes 10.9%
from Birmingham B1 1RF, 49km northeast (36°)
to BBC West Midlands region - 66 masts.
![regional news image](/styles/images/regionalnews/302x152/itv-central.jpg)
ITV Central News 2.9m homes 10.9%
from Birmingham B1 2JT, 49km northeast (35°)
to ITV Central (West) region - 65 masts.
All of lunch, weekend and 80% evening news is shared with Central (East)
How will the Malvern (Worcestershire, England) transmission frequencies change over time?
1984-97 | 1997-98 | 1998-2011 | 2011-13 | 7 Mar 2018 | |||||
C/D E | C/D E | C/D E | C/D E T | W T | |||||
C29 | SDN | ||||||||
C31 | ArqA | ||||||||
C37 | ArqB | ||||||||
C41 | BBCA | ||||||||
C44 | D3+4 | ||||||||
C47 | BBCB | ||||||||
C50tv_off | SDN | ||||||||
C51tv_off | _local | _local | |||||||
C53tv_off | BBCA | ||||||||
C55tv_off | ArqB | ||||||||
C56tv_off | BBC1waves | BBC1waves | BBC1waves | ||||||
C57tv_off | D3+4 | ||||||||
C59tv_off | -ArqA | ||||||||
C60tv_off | -BBCB | ||||||||
C62 | BBC2waves | BBC2waves | BBC2waves | ||||||
C66 | ITVwaves | ITVwaves | ITVwaves | ||||||
C68 | C4waves | C4waves | C4waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 7 Sep 11 and 21 Sep 11.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 2kW | |
SDN, ARQA, ARQB, BBCA, D3+4, BBCB | (-7dB) 400W | |
Mux 1*, Mux 2*, Mux A*, Mux B*, Mux C*, Mux D* | (-10dB) 200W |
Local transmitter maps
Malvern Freeview Malvern DAB Sutton Coldfield TV region BBC West Midlands Central (West micro region)Which companies have run the Channel 3 services in the Sutton Coldfield transmitter area
|
|
Tuesday, 4 October 2011
M
Mike Dimmick2:21 PM
Graham Booth: Lower quality values after DSO - assuming that it's a grade out of 10 - is often an indicator of too much signal. See Freeview signals: too much of a good thing is bad for you | ukfree.tv - independent free digital TV advice for more information.
link to this comment |
Thursday, 13 October 2011
Sunday, 16 October 2011
I
Iain Sherriff11:49 AM
Malvern
I have a humax 9150, a DAEWOOO TV, and a basic Hitachi PVR. My aerial (10 yrs old) has a masthead amp and the PWS is working. Mostly things are all fine BUT ITV1, Film4 and C5 all occasionally give "channel scrambled or not available".
Postcode WR13 5DW. I'm using the Malvern transmitter.
Have checked connections in the house (cant get to aerial) and when the problem shows it happens to all 3 devices.
Do I just need a new aerial or could there be something else ?
Any help welcome........
link to this comment |
Iain's: mapI's Freeview map terrainI's terrain plot wavesI's frequency data I's Freeview Detailed Coverage
T
terence porter 2:11 PM
we cannot receive HD signals all the time sometime it is on. other times it is not and it is not showing any signal strength when it does it shows S as good butQ as poor 13 to 28 % at the moment ( sunday afternoon) there is no signal at all on HD why is it on sometimes and other times not on?
link to this comment |
K
KMJ,Derby2:43 PM
terence porter: Check for single frequency interference on or near C60. Also check your cables and connectors are in order and try changing the position of any HDMI cable.
link to this comment |
J
jb384:23 PM
Iain Sherriff: Its difficult to say exactly what could be causing your problem, this because the reason for could be at either end of the signal strength scale.
Firstly, as you are only 3 miles away from the transmitter (albeit only 400W) and are using a masthead amplifier, then you "might" be receiving a signal that's on the verges of being too strong, and which can cause problems in the tuner.
I would normally say to try a test by-passing the booster, but this is obviously not possible if its mast head type, so (if available) try a test using a set top aerial, should you still be able to get a reasonable (although not perfect) picture by using it then the mast head amplifier requires by-passing, or alternatively you could purchase a simple attenuator to place in line with the aerial socket.
The second reason is, if there are any local obstructions between you and the transmitter then the signal could be hovering just above the reception threshold of your equipment and that's the reason for the problem, try a signal strength / quality check on your Humax and watch if the quality is erratic, as if is then you are in the realms of requiring the aerial system to be investigated, and with this possibly meaning the slight repositioning of it, an action which sometimes works wonders.
Give an update on the signal strength though!
link to this comment |
I
Iain Sherriff7:22 PM
Malvern
jb38: thanks.
nothing missing at the moment (typical!)
signal quality on ITV 100% and strength 80%, on 5 the same and on Film4 the same. No fluctuation on any.
I guess I'll have to wait for the scrambled message the have a look ? There are trees and the end of the Malvern Hills between us and the Transmitter.
link to this comment |
Iain's: mapI's Freeview map terrainI's terrain plot wavesI's frequency data I's Freeview Detailed Coverage
J
jb387:56 PM
Iain Sherriff: Thanks for the update, and yes! a report on what's seen when it isn't OK would make it easier to assess the situation, and as aforementioned the signal checking being done on the Humax as they are one of the better boxes to use for tests.
I will say though, that the signal strength you have reported doesn't suggest that its likely to get to the point of being over the top, that is "if" its presently at its best.
link to this comment |
A group of channels _ Pick TV, Dave, (and plus ones), Challenge, Really - are there sometimes and then not there. When there they're fine but at other times just a blank screen (though they're in the EPG).
Aerial on roof.
Grateful for any help.
link to this comment |
trevor's: mapT's Freeview map terrainT's terrain plot wavesT's frequency data T's Freeview Detailed Coverage
Monday, 17 October 2011
I
Iain Sherriff5:23 AM
Malvern
I should have said in my original post that the common effect of our problem is not seeing the scrambled" message but that programmes dont get recorded now and then. They can be shown in the "to record list" but just dont appear after the programme has run............I have just assumed that this is caused by the "scrambling"
link to this comment |
Iain's: mapI's Freeview map terrainI's terrain plot wavesI's frequency data I's Freeview Detailed Coverage
Select more comments
Your comment please