Full Freeview on the Ridge Hill (County of Herefordshire, England) transmitter
Brian Butterworth first published this on - UK Free TV
Google Streetview | Google map | Bing map | Google Earth | 51.997,-2.540 or 51°59'49"N 2°32'25"W | HR8 2PG |
The symbol shows the location of the Ridge Hill (County of Herefordshire, England) transmitter which serves 270,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Ridge Hill (County of Herefordshire, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Ridge Hill transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Ridge Hill transmitter?
BBC Midlands Today 2.9m homes 10.9%
from Birmingham B1 1RF, 69km northeast (39°)
to BBC West Midlands region - 66 masts.
ITV Central News 2.9m homes 10.9%
from Birmingham B1 2JT, 69km northeast (39°)
to ITV Central (West) region - 65 masts.
All of lunch, weekend and 80% evening news is shared with Central (East)
Are there any self-help relays?
Whitton | Transposer | 35 km NW Hereford | 40 homes |
How will the Ridge Hill (County of Herefordshire, England) transmission frequencies change over time?
1968-80s | 1984-97 | 1997-98 | 1998-2011 | 2011-13 | 1 Mar 2018 | ||||
VHF | A K T | A K T | A K T | W T | W T | ||||
C6 | ITVwaves | ||||||||
C21 | +SDN | SDN | |||||||
C22 | BBC1waves | BBC1waves | BBC1waves | +BBCB | BBCB | ||||
C24 | ArqA | ArqA | |||||||
C25 | ITVwaves | ITVwaves | ITVwaves | D3+4 | D3+4 | ||||
C27 | ArqB | ArqB | |||||||
C28 | BBC2waves | BBC2waves | BBC2waves | BBCA | BBCA | ||||
C29 | D3+4 | ||||||||
C30 | _local | ||||||||
C32 | C4waves | C4waves | C4waves | com7 | |||||
C34 | com8 | ||||||||
C35 | C5waves | C5waves | |||||||
C51tv_off | _local | _local | |||||||
C55tv_off | com7tv_off | ||||||||
C56tv_off | COM8tv_off |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 6 Apr 11 and 20 Apr 11.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-5 | 100kW | |
BBCA, D3+4, PSB2 iw, BBCB | (-7dB) 20kW | |
com7 | (-9.8dB) 10.5kW | |
SDN, ARQA, ARQB | (-10dB) 10kW | |
com8 | (-10.1dB) 9.8kW | |
Mux 1*, Mux 2*, Mux A*, Mux B*, Mux C*, Mux D* | (-17dB) 2kW |
Which companies have run the Channel 3 services in the Ridge Hill transmitter area
|
|
Is the transmitter output the same in all directions?
Radiation patterns withheldSunday, 25 February 2024
C
Chris.SE5:07 PM
Charlie S:
Hi there. Well I'm glad your intermittent drop-outs have stopped. When Planned Engineering is going on, especially when we don't know exactly what is involved at any instant, it's so difficult to deduce what might be causing a particular problem.
Whilst coverage maps give an idea, they aren't infallible, but it looks as though your postcode is borderline for the different transmitters and the postcode pin on the map will be generic, so it's highly likely that it'll depend exactly where you are within the area and the very local terrain or obstructions, and the only absolute way of knowing which is best is there on the ground (should I say roof) with a professional signal strength meter!
As I'm sure you realise, interference could affect one or more frequencies but only show up under certain circumstances and there's not necessarily any consistency in how each may be affected!!
Eg. if you have 100% Quality is doesn't mean you'd always be interference free, and likewise having 85% or 93% doesn't mean you'll definitely suffer interference, though it's more likely if there was some interfering signal present.
The Strength/Quality figures you've posted look quite good apart from that ArqB Quality showing up on the TV. Out of curiosity try connecting the aerial direct to the TV and see if it changes the figures.
The differences between the PVR and TV could be due to the ability of the decoders to correct the errors or even down to where any interference is getting into the system. If the quality on ArqB improves when you plug the aerial direct to the TV, if it's a poor quality flylead normally between the PVR and TV that could be a suspect. Also HDMI can sometimes give interference to the RF signals, try and keep any such leads well apart especially if you haven't got double screened coax for the flyleads or aerial cable.
Another thing I nearly forgot, have you got any old kit with an analogue RF output that could be tuned to an RF channel that could result in interference eg. a Games console, a VHS recorder, etc.?
The strength figures as they are, are perhaps to be expected as the COMs from Ridge Hill are 10kW and the PSBs 20kW., and those slight differences with the COMs could be peaky aerial responses or of course due to the Planned Engineering which is supposedly still going on!
Interference due to intermod products etc. Hmm, yes, anything's possible I've always concluded as so much depends on the quality of the design. You'd hope that aerial amp/splitters would be immune but stuff could still get in directly to the circuitry if the signals are strong enough and it's a poor design, it doesn't necessarily have to be getting in via the aerial input!
There a simple check regarding your WiFi - switch it all off :D If the Quality on Quest/ArqB improves then you have a suspect. It won't of course necessarily be direct interference to the 500-600MHz range, if one of the stages in the amp gets saturated then how it behaves wrt 500/600MHz could be quite unpredictable!
It could still be getting in via the aerial input though. One helpful thing if this appears to be the case, is that the "Free" filters from Restore TV would clobber that as well, as they are low pass filters.
Although your postcode isn't supposed to have had postcards, it doesn't mean there isn't a problem with mobile signals. Can you see any new masts nearby? How strong are the mobile signals now, you mentioned a Vodafone 3G booster in the past, so I assume you may now have stronger signals if you don' need it?
We have encountered quite a few cases where people should have had postcards but haven't :(
If you suspect the possibility of mobile interference, then get onto them for a Filter. I wouldn't mention the WiFi, that'll just be an extra benefit of the filter.
I'd simply say that you seem to get regular interference problems as your received signal quality drops, where as the signal strength still remains quite high.
HTH, I'll post again if I think of anything else. Let us know how you're getting on with any checks/tests.
link to this comment |
Thursday, 29 February 2024
N
Neil10:13 AM
Chris.SE:
Currently have no TV reception in Pevensey?
Why can't the transmitter boost their signal
link to this comment |
S
StevensOnln110:32 AM
Neil: There is engineering work listed for Ridge Hill this week, which often requires the transmitter's power output to be reduced so that the engineers can work safely. Increasing the power would lead to interference with other transmitters which use the same frequency. If you provide a full postcode we can see what your predicted signal strength is and whether you might be able to get a better service from another transmitter.
link to this comment |
S
Steve Donaldson12:06 PM
Neil: The only Pevensey I am aware of is the one on the south coast, just outside Eastbourne. If you are there then you definitely aren't using Ridge Hill, which is not far from Hereford.
Which transmitter are you using? The most common one used in Pevensey is Heathfield. Maybe you are using that, or Hastings if you can't receive from Heathfield.
If you are looking for more specific advice, then a full postcode is really required to get an idea of what reception may be like in the area. Also, if this affects some channels and not others, which channels does it affect?
link to this comment |
C
Chris.SE3:10 PM
Steve Donaldson:
Both those transmitter had Planned Engineering last week. Although not listed this week, work might have overrun!
I assume that Neil has checked his aerial looks intact and still pointing the way it was! And which direction (compass bearing) does it point Neil?
link to this comment |
Sunday, 28 April 2024
P
Paul Evans10:46 PM
Yet another week of engineering work! You've said previously that 'Transmitter engineering' never explain, but can anyone suggest what 'they' might be doing?
It has been going on for months - it certainly degrades the signal, as they suggest.
If they're not careful they'll ruin Wimbledon watching as well as 6 Nations Rugby. And then there's the Olympics.
They could have built a whole new transmitter in the time it's taking.
link to this comment |
C
Chris.SE11:45 PM
Paul Evans:
Have you changed postcode since 2018? If not, why are you using Ridge Hill and not Bromsgrove?
Have you checked that you are correctly tuned to Ridge Hill's UHF channels, and not got inadvertently tuned to another transmitter at some point perhaps if you retuned.
They could be replacing Antenna, or its Cabling or just maintaining/replacing guide cable stays and the like to ensure the mast doesn't collapse in some of the more severe weather we seem to be experiencing these days.
A lot of work like that is weather dependent, and you cannot work close to the antenna etc when it's running at full power.
If you've changed postcode, we maybe able to make suggestions or comment about reliability of reception, possibility of interference etc.
link to this comment |
Monday, 29 April 2024
P
Paul Evans6:08 PM
Chris.SE:
Thanks for your comments.
The problem with using Bromsgrove is the Lickey Incline, which is at the bottom of my garden. Without that it would be line of sight, pretty much, to the Worms Ash transmitter, 2.5 miles away. The aerial fitter did start with that setup, but the first train that went past chopped up the signal. And there are plenty of trains.
Although Ridge Hill is a bit distant, there are no real obstructions, so it has been a good service since we moved here 9 years ago. I have absorbed the warnings about retuning and I try to make sure I am using the specific Ridge Hill channels.
I note your comments about engineeering work needing to be done safely, my frustration is that it seems to have become a continuous process since last year at least.
link to this comment |
C
Chris.SE10:18 PM
Paul Evans:
Thanks for the update. Trains! Yes a big disrupter of signals when on the line-of-sight :o
You aren't the only one who's been frustrated, many main transmitter have been in the same situation, I just wish they'd try and provide a bit more detail.
link to this comment |
Select more comments
Your comment please