Full Freeview on the Sandy Heath (Central Bedfordshire, England) transmitter
Brian Butterworth first published this on - UK Free TV
Google Streetview | Google map | Bing map | Google Earth | 52.130,-0.242 or 52°7'47"N 0°14'33"W | SG19 2NH |
The symbol shows the location of the Sandy Heath (Central Bedfordshire, England) transmitter which serves 920,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Sandy Heath (Central Bedfordshire, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Sandy Heath transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Sandy Heath transmitter?
BBC Look East (West) 1.0m homes 3.7%
from Cambridge CB4 0WZ, 29km east-northeast (65°)
to BBC Cambridge region - 4 masts.
70% of BBC East (East) and BBC East (West) is shared output
ITV Anglia News 1.0m homes 3.7%
from Norwich NR1 3JG, 119km east-northeast (60°)
to ITV Anglia (West) region - 5 masts.
All of lunch, weekend and 80% evening news is shared with Anglia (East)
How will the Sandy Heath (Central Bedfordshire, England) transmission frequencies change over time?
1965-80s | 1984-97 | 1997-98 | 1998-2011 | 2011-13 | 12 Feb 2020 | ||||
VHF | A K T | K T | K T | W T | W T | ||||
C6 | ITVwaves | ||||||||
C21 | C4waves | C4waves | C4waves | +BBCB | BBCB | ||||
C24 | ITVwaves | ITVwaves | ITVwaves | D3+4 | D3+4 | ||||
C27 | BBC2waves | BBC2waves | BBC2waves | BBCA | BBCA | ||||
C31 | BBC1waves | BBC1waves | BBC1waves | ||||||
C32 | com7 | ||||||||
C33 | SDN | ||||||||
C34 | com8 | ||||||||
C35 | _local | ||||||||
C36 | ArqA | ||||||||
C39 | C5waves | C5waves | |||||||
C43 | _local | ||||||||
C48 | ArqB | ArqB | |||||||
C51tv_off | SDN | ||||||||
C52tv_off | ArqA | ||||||||
C55tv_off | com7tv_off | ||||||||
C56tv_off | COM8tv_off |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 30 Mar 11 and 13 Apr 11.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 1000kW | |
BBCA, D3+4, BBCB | (-7.4dB) 180kW | |
SDN, ARQA, ARQB | (-7.7dB) 170kW | |
com7 | (-13dB) 49.6kW | |
com8 | (-13.1dB) 49.1kW | |
Mux 1*, Mux 2*, Mux A*, Mux B*, Mux C*, Mux D* | (-17dB) 20kW | |
Analogue 5 | (-20dB) 10kW |
Which companies have run the Channel 3 services in the Sandy Heath transmitter area
|
|
Wednesday, 24 June 2020
S
Stuart Blackstock11:40 PM
I have freeview only on my TV (a 6 month old LG 65SM8600PLA ). I have had no reception on ANY channel today. I've retuned it 3 times (each 2 hours apart). Still no signal at all.
I'm at MK419TE (12) in Bedford, so it's the Sandy Heath transmitter)
link to this comment |
Thursday, 25 June 2020
C
Chris.SE12:33 AM
Stuart Blackstock:
As per several posts last night, Sandy Heath is listed for Planned Engineering with "Possible weak signal" and it did in fact go off-air last night for the essential engineering. This is likely to happen again whilst the work continues.
There's also some Tropospheric Ducting around at present affecting various parts of the country at different times which may cause interference/temporary loss of signal and may continue periodically for a couple of days.
Try "Auto Tuning" but select "Skip" as soon as it starts. This should clear all previous tuning.
Then repeat the auto tune and allow it to complete. You might possibly have to repeat tune if any multiplexes are off-air or suffering interference at the time you last tried.
If you are still having problems, post back.
link to this comment |
J
John11:50 AM
Hi,
What is the latest info regarding COMS 7 and 8. being removed?
link to this comment |
S
StevensOnln11:55 PM
John: Channels on COM7 & COM8 have been reshuffled, so that the remaining channels are all now on COM7, with COM8 now only broadcasting retune messages, ahead of being switched off by the end of the month. There is no confirmed date for when COM7 will close, or whether any of the remaining channels will move to other multiplexes.
link to this comment |
M
Martin Wheller3:55 PM
Stuart Blackstock: I also have not had any television signal for the last 60 hours or so. None of my sets are showing anything but 'No Signal'. I have been waiting assuming that it's atmospheric conditions and work happening on the Sandy Heath transmitter. I've tried to retune one of my four TVs and when I start that I get told that there are no channels listed. My next door neighbour does have Freeview signal. If it doesn't improve over the next 24 hours I think I'm going to have to assume the problem is my end.
link to this comment |
C
Chris.SE4:28 PM
Martin Wheller:
It could be a combination of some tropospheric ducting that's around and the engineering, unfortunately. Did you try the retune method I suggested to Stuart?
If your neighbour has signal, you may have some issues with your installation. I suggest you check all you coax plugs, connections, flyleads etc, unplug connectors check for corrosion or other problems and reconnect them. Flyleads can be a common problem, try swapping them. See what signal strengths (if any) and quality you are getting for any multiplexes shown in your TV's manual tuning section if you can, this might indicate potential issues with your aerial or downlead. Also check that your downlead looks undamaged and that your aerial seems intact and pointing in the correct direction.
Problematic connections, water ingress etc. can seem to affect reception of just an individual or several multiplexes.
Having done all the above, if you still have problems, if you can, take any booster/splitters out of circuit and plug the aerial lead direct to one tv outlet and see what you get.
If you provide a full postcode, we can look at the predicted reception in your area, you may be in a "borderline" location.
link to this comment |
C
Chris.SE7:05 PM
John:
OFCOM have updated the Arqiva licence for COMs 7&8 to be consistent with the forthcoming auction of the 700MHz frequencies (date TBD). Whichever MNOs (if any) buy the centre frequencies in which these two muxes reside, then they may give 3 months notice for closure, or there's an endstop date of 30th June 2022 whichever is sooner.
See https://www.ofcom.org.uk/….pdf
The recent decision to close COM8 was a commercial one made by Arqiva -
Quote -
"The initial licence period comes to an end in June and Ofcom has issued revised licence terms reflecting the fact that the services may have to terminate at short notice if the spectrum is needed for mobile data services. Given this uncertainty, and through discussions with the channels on Com 7 & 8, Arqiva has taken the decision to rationalise the services onto one multiplex.
The Covid-19 crisis has caused some uncertainty over the precise duration of the licence for some of the channels using Com 7 & 8. This has meant that there was not enough demand to make it financially viable to maintain two multiplexes.While channels are closing and we do appreciate that this may cause concern, a lot of work has taken place to ensure that viewers will still have access to the same content via main channels and on demand services."
In practical terms, the earliest COM7 would be likely to close would most likely well into 2021 or later. The 700MHz frequency clearance has to be completed (postponed because of Covid-19), currently suggested to be early 2021 and the auction has to be held. Encoders to use SDL on the centre frequencies need to be developed (and installed) as well as handsets. It's not going to happen in a hurry.
link to this comment |
Friday, 26 June 2020
O
Owen2:18 AM
Is the channel / frequency list for this transmitter now slightly out of date?
- As I get Freeview Ch.12 Quest etc. on TV Ch. 33 (570MHz), which isn't listed fr this transmitter.
I'm fairly sure I am getting this from Sandy, as it is as strong as all the other Sandy Heath channels 24, 27 & 36 that I can receive in a rather marginal coverage area of Northampton.
So I can't get anything on TV ch.51, if COM4 / SDN is actually still there (The How TV channels change over time only goes upto 2014, although it seems it was originally planned for this to go at the end of this month - but not sure where the Freeview channels on this multiplex would move to)
TIA
link to this comment |
C
Chris.SE6:07 AM
Owen:
Unfortunately the site owner has not been able to keep it up-to-date with all the 700Mhz Clearance changes as us contributors have posted a few times.
Sandy Heath's channels are C27, C24, C21, C33, C36, C48, C55 in the order PSBs1-3, COMs4-7. Also note C35 is a Local multiplex for Cambridge from the nearby Madingley transmitter, which you may or may not receive depending on your location.
For a list of which channels are on which multiplex, see Channel listings | Freeview
link to this comment |
O
Owen3:09 PM
Chris:
Thanks for the reply, solving the confusion with the main Info on this page.
It seems the main change was a move of C51 to C33, and I believe this may have happened late last year, as I was then able to get channels listed on that COM4 Multiplex for the first time and presumably was part of the 700MHz clearance plan. With C56 now being removed for other reasons and C55 to eventually.
I assume which Freeview channels are on which Muliplex is still basically the same?
(Although there have often been some shuffles in the past, so it would be good to know exactly where they are on this particular Transmiiter and not usually documented on other websites)
It's a pity that C48 looks like it will stay up there on its own long term, as it's just under 700MHz, and so quite a bit higher than the C21-C36 range of the others (which only need a Group A aerial).
I did originally buy a Group W antenna, to cope with all future changes, but I'm not convinced it works too well at upper end as I've never been able to get C48 or ones in the 50's
- despite C48 being basically as high a power as the others that are OK most of the time.
I might have to try one of the newer group T ones, to see if the narrower response / reduced top end gives a more consistent response.
link to this comment |
Select more comments
Your comment please