Full Freeview on the Selkirk (The Scottish Borders, Scotland) transmitter
|Google Streetview||Google map||Bing map||Google Earth||55.556,-2.794 or 55°33'21"N 2°47'39"W||TD7 4QN|
The symbol shows the location of the Selkirk (The Scottish Borders, Scotland) transmitter which serves 24,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problemsThe BBC and Digital UK report there are no faults or engineering work on the Selkirk (The Scottish Borders, Scotland) transmitter.
Which Freeview channels does the Selkirk transmitter broadcast?If you have any kind of Freeview fault, follow this Freeview reset procedure first.
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 2/3 24.1Mb/s DVB-T MPEG2
DTG-6 256QAM 32KE 2/3 40.2Mb/s DVB-T2 MPEG4
DTG-8 64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Are you trying to watch these 0 Freeview HD channels?
The Selkirk (The Scottish Borders, Scotland) mast is not one of the extended Freeview HD (COM7 and COM8) transmitters, it does not provide these high definition (HD) channels: .
If you want to watch these HD channels, either use Freesat HD, or move your TV aerial must point to one of the 30 Full Freeview HD transmitters. For more information see the want to know which transmitters will carry extra Freeview HD? page.
Which BBC and ITV regional news can I watch from the Selkirk transmitter?
BBC Reporting Scotland 2.4m homes 9.2%
from Glasgow G51 1DA, 100km west-northwest (291°)
to BBC Scotland region - 230 masts.
ITV Lookaround 0.1m homes 0.4%
from Carlisle CA1 3NT, 75km south (187°)
to ITV Border Scotland region - 27 masts.
All of lunch, weekend and 50% evening news is shared with Tyne Tees
Are there any self-help relays?
|Sourhope||Active deflector||Nr Yetholm||6 homes|
How will the Selkirk (The Scottish Borders, Scotland) transmission frequencies change over time?
|1961-80s||1984-97||1997-98||1998-2008||2008-13||17 Apr 13||2013-17||14 Aug 2019|
|VHF||C/D E||C/D E||C/D E||C/D E||C/D E T||C/D E T||K T|
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 6 Nov 08 and 20 Nov 08.
How do the old analogue and currrent digital signal levels compare?
|BBCA, D3+4, BBCB||(-7dB) 10kW|
|SDN, ARQA, ARQB||(-10dB) 5kW|
|Mux 1*, Mux 2*, Mux A*, Mux B*||(-12.2dB) 3kW|
|Mux C*, Mux D*||(-20dB) 500W|
Which companies have run the Channel 3 services in the Selkirk transmitter area
Lochpark road Hawick TD9 9HZ. I am a retired electronics engineer with experience in large tv distribution systems in 2 hospitals and many home instalations both analogue and digital but have not had this problem before .... which happens to be my own home !
The aerial is outside and what would seem correctly aligned on Selkirk, it had a mast head amp with 3 way splitter at ground level which was very rusty inside so I replaced it as high as I could and fed the downlead to a D/A under the floor at the same time replacing old coax cables. The problem seems to affect the HD channels more than the standard channels and also a few of the minority channels, the field strength is excellent and stable while the bit error rate is mostly good but does dip and dive a lot and at times it dips off the lower end of the scale momentarily at which point you get the "no signal" on the tv , I still have my Horizon field strength meter from my working days and this confirms the indication viewed on the on screen tv display, I have tried the usual stuff like attenuation to avoid too high a signal strength but the problem is the same. This is a first for me to have a good field strength but a BER which is very unstable. Do you think this could be some sort of interference signal or is it likely to be the aerial itself ? or some other, though I understand that neighbors dont have the problem . I would be interested to hear any comments from the experts, thank you
|link to this comment|
Hi. That does sound rather like the problem is probably "Tropospheric Ducting" As the CCI increases, (could be Europe or the UK). the BER increases to the point where the set can't tell if it's a signal and thinks it's noise so the strength goes to zero.
This type of problem doesn't always affect all muxes the same at any given instant and of course will depend on where the CCI is coming from as to which channels may be affected, and of course the ducting can be frequency dependant!
Whilst one coverage map shows parts of Hawick not well covered, predictions for your postcode are good by both the BBC and Freeview.
Both of them have issued warnings over the last week or two about reception being affected by the "high pressure" (hmm, as you probably know such ducting doesn't always come with every high pressure!).
Tropo predictions show it's likely to come and go and be quite variable over the coming days. Nowt one can do about it of course!
When you've had the problem recently are the other muxes affected PSB2/D3&4 and COM4/SDN by any chance?
If the HD mux is a persistent problem, you could try tuning UHF C30 for the Hawick relay as it's so close to you, you may get it off a sidelobe!
|link to this comment|