Full Freeview on the Sutton Coldfield (Birmingham, England) transmitter
 | Google Streetview |  | Google map |  | Bing map |  | Google Earth |  | 52.600,-1.835 or 52°36'1"N 1°50'5"W |  | B75 5JJ |
The symbol shows the location of the Sutton Coldfield (Birmingham, England) transmitter which serves 1,870,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Sutton Coldfield (Birmingham, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Sutton Coldfield transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Sutton Coldfield transmitter?
BBC Midlands Today 2.9m homes 10.9%
from Birmingham B1 1RF, 15km south-southwest (200°)
to BBC West Midlands region - 66 masts.
ITV Central News 2.9m homes 10.9%
from Birmingham B1 2JT, 15km south-southwest (201°)
to ITV Central (West) region - 65 masts.
All of lunch, weekend and 80% evening news is shared with Central (East)
Are there any self-help relays?
| Burton (shobnall) | Transposer | 1 km W Burton-on-Trent | 60 homes |
| Coalville | Transposer | 18 km NW Leicester | 600 homes |
| Solihull | Transposer | Land Rover building | 400 homes |
How will the Sutton Coldfield (Birmingham, England) transmission frequencies change over time?
| 1950s-80s | 1984-97 | 1997-98 | 1998-2011 | 2011-13 | 7 Mar 2018 | ||||
| VHF | B E T | B E T | B E T | B E K T | W T | ||||
| C4 | BBCtvwaves | ||||||||
| C33 | com7 | ||||||||
| C35 | com8 | ||||||||
| C36 | LOCAL2 | ||||||||
| C39 | +ArqB | ArqB | |||||||
| C40 | BBC2waves | BBC2waves | BBC2waves | +BBCB | BBCB | ||||
| C42 | SDN | SDN | |||||||
| C43 | ITVwaves | ITVwaves | ITVwaves | BBCA | BBCA | ||||
| C45 | ArqA | ArqA | |||||||
| C46 | BBC1waves | BBC1waves | BBC1waves | D3+4 | D3+4 | ||||
| C48 | _local | ||||||||
| C50tv_off | C4waves | C4waves | C4waves | ||||||
| C51tv_off | LB | ||||||||
| C55tv_off | com7tv_off | ||||||||
| C56tv_off | COM8tv_off |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 7 Sep 11 and 21 Sep 11.
How do the old analogue and currrent digital signal levels compare?
| Analogue 1-4 | 1000kW | |
| SDN, ARQA, ARQB, BBCA, D3+4, BBCB | (-7dB) 200kW | |
| com7 | (-10.5dB) 89.2kW | |
| com8 | (-10.7dB) 86kW | |
| LB | (-20dB) 10kW | |
| Mux 1*, Mux 2*, Mux A*, Mux B*, Mux C*, Mux D* | (-21dB) 8kW |
Which companies have run the Channel 3 services in the Sutton Coldfield transmitter area
|
|
Thursday, 12 January 2012
A
avril9:11 PM
hi ive checked everything and for the last two days ive had no tv im in newbold rugby area can anyone help ive tried three different tvs and they have three different ariels can anyone help
| link to this comment |
Sunday, 15 January 2012
avril: Please can you see Freeview reception has changed? | ukfree.tv - independent free digital TV advice for help?
| link to this comment |
Saturday, 21 January 2012
B
b smith2:56 PM
I have a panasonics txl32c4e non freeview ,its tuned to my needs,
however I cant tune the 4 uk HD
cannels.Can you tell me how?
| link to this comment |
J
jb387:18 PM
b smith: I checked the specifications of that model which indicates that it only has a DVB-T tuner fitted, and not DVB-T2 as is necessary for HD reception of any channels in the UK.
You will be able to tell by channels 51 - 54 being missing in the EPG list.
| link to this comment |
Sunday, 22 January 2012
Chris Onion
6:32 PM
Derby
6:32 PM
Derby
Is there a problem today because of the weather. All the channels on 674 (ITV1 in particular but all the others on that frequency) and 642 seem to have signal quality down to 15% and a signal strength of about 25%? The picture keeps freezing and pixelating and then states the Freeview signal is of twoo poor a quality. Have disconnected and reset the box but the fact the BBC isgnals are fine, I can't see it being a problem with my equipment or surely all the challens would have some sort of interference.
It is a pain as the programs are impossible to watch.
This seems to be happening a lot since the digital switchover.
We have had new aerials - the HA came out and put them in. Seriously why on earth can't they sort these problems out - isn;t that what we pay TV licences for????
| link to this comment |
Chris's: mapC's Freeview map terrainC's terrain plot wavesC's frequency data C's Freeview Detailed Coverage
Monday, 23 January 2012
Saturday, 28 January 2012
P
Phil11:31 PM
Pershore
Postcode WR10 2BP. Tuned to the Sutton Coldfield transmitter, and signal strengh is an average 51% on nearly all channels. What I want to know is why, when watching some channels, the sound and vision go completely out of syncro? It starts off OK but after a while you can sense the syncronisation is out of phase with the picture. Switching channel off, then back on again solves the problem for a while, but surely one should not need to do this to digital TV. Never had this problem with analogue, and yet they say digital is better. If I set my PVR to record a programme whilst I am in bed, how can I correct the sound syncronisation? At the end of the programme it would be out by as much as 5 minutes.
| link to this comment |
Phil's: mapP's Freeview map terrainP's terrain plot wavesP's frequency data P's Freeview Detailed Coverage
Tuesday, 31 January 2012
B
barry lloyd7:15 PM
i have a loft aerial that was fitted brand new about 12 months ago,my lounge TV is analogue and i have a PVR hard drive recorder,for some reason over the last 2 months it keeps freezing, and will not let you record or change channels,i have sent it to a company who specialise in these PVRs, and they tell me there is nothing wrong with it,if i connect it to my bedroom TVs [we have two] both with freeview built in it works fine, can any one tell me what to do im at my wits end.
| link to this comment |
C
c/s GBXZ8:49 PM
barry lloyd:
A couple of main things spring to mind -
1/ THE USUAL CULPRIT IN MOST HOUSES - Overheating in the lounge, but not in the bedroom??? Allow plenty of ventilation around and under it. Don't put it in a cabinet for example, even if it's an open-fronted one (+on top of a TV is a _very_ bad place, both old CRT/glass TVs (heat, strong magnetic fields and static) and new "flat" ones (mainly heat)
To improve ventilation, stand it on 4 empty matchboxes or similar small blocks and make sure the vents aren't blocked with dust.
NEVER cover things like this with ANYTHING. Even a TV remote left on top can make some consumer-grade kit overheat nowadays.
If it lasts longer when better ventilated, prove it by blowing a desk fan over it for a few hours and see if it still locks up.
2/ Some PVR things might get very confused if can't get it's channels correctly - a bad signal corrupting the EPG can sometimes cause the software to hang (*)
Check your wiring - coax leads to the wall aerial socket for example.
Other factors:
3/ occasionally (quite rare nowadays) florescent lights interfere with the infra-red remote control codes. Sometimes the remote control command meant for the TV or VCR/DVD/HIFI might get confused and cause a software hang (*) This fault sucks.
To try to rule this out, tape a piece of card over the infrared sensor on the PVR t shade it from the room light but NOT from the remote. This is almost unheard of nowadays but I've had to do this for a couple of mates recently.
4/ Power glitches can cause lockups - things like kettles, washing machines/dryers, welders and other heavy loads on the same ring-main sockets can cause glitches that may not affect upstairs so much. A "transient protector" can sometimes help, but in some cases a house rewire is in order (!). Very drastic but I have seen it.
5/ Some weird interaction due to leakage currents from the various switch-mode PSUs in the TV/DVD/VCR/etc etc downstairs. Try a different socket, or try a 4-way or 6-way strip and plug everything into it (eg: all TV kit on one socket) to see if it makes a difference. This problem is sometimes manifested by a little electrical "tickle" shock when you plug aerial and audio cables into set-top boxes and PVR/DVD kit whist plugged in, even if on standby. It's a nightmare to explain to a layman, never mind sort out.
(*) this is bad programming, the software _shouldn't_ "lock up" on errors like this. Dream on.
My first guess is heat/ventilation problem, given a change in room helps. Next guess is a confused EPG dues to bad connection in aerial lead downstairs
Good luck.
| link to this comment |
C
c/s GBXZ8:53 PM
barry lloyd:
also, bear in mind that loft antennae are _always_ a bad compromise, the fact that there's more signal upstairs due to a shorter cable run than to downstairs may be causing the software to get confused, see above ^
| link to this comment |
Select more comments
Your comment please