Full Freeview on the Black Hill (North Lanarkshire, Scotland) transmitter
 | Google Streetview |  | Google map |  | Bing map |  | Google Earth |  | 55.861,-3.874 or 55°51'40"N 3°52'27"W |  | ML7 4NZ |
The symbol shows the location of the Black Hill (North Lanarkshire, Scotland) transmitter which serves 940,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Black Hill (North Lanarkshire, Scotland) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Black Hill transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Black Hill transmitter?
BBC Reporting Scotland 2.4m homes 9.2%
from Glasgow G51 1DA, 26km west (271°)
to BBC Scotland region - 230 masts.
STV News 1.3m homes 4.8%
from Glasgow G51 1PQ, 26km west (271°)
to STV Central (Glasgow) region - 94 masts.
Are there any self-help relays?
| Ardtornish A | Transposer | 22 km NW Oban | 15 homes |
| Balquhidder | Transposer | 12 km NW Callander | 42 homes |
| Benmore B | Active deflector | 50 m WNW Glasgow | 7 homes |
| Blair Drummond | Transposer | 5 homes caravan park | |
| Blyth Bridge | Active deflector | 30 km SW Edinburgh | 50 homes |
| Glendaruel | Active deflector | 40 hotel | 40 homes hotel |
| Glendaruel B | Active deflector | 12 homes (second level) |
How will the Black Hill (North Lanarkshire, Scotland) transmission frequencies change over time?
| 1957-80s | 1984-97 | 1997-98 | 1998-2011 | 2011-13 | 3 Oct 2018 | ||||
| VHF | B E T | B E T | B E T | E T | W T | ||||
| C10 | ITVwaves | ||||||||
| C30 | _local | ||||||||
| C32 | com7 | ||||||||
| C35 | com8 | ||||||||
| C37 | C5waves | C5waves | |||||||
| C40 | BBC1waves | BBC1waves | BBC1waves | BBCB | BBCB | ||||
| C41 | +SDN | SDN | |||||||
| C43 | ITVwaves | ITVwaves | ITVwaves | D3+4 | D3+4 | ||||
| C44 | ArqA | ArqA | |||||||
| C46 | BBC2waves | BBC2waves | BBC2waves | BBCA | BBCA | ||||
| C47 | ArqB | ArqB | |||||||
| C50tv_off | C4waves | C4waves | C4waves | ||||||
| C51tv_off | LG | ||||||||
| C55tv_off | com7tv_off | ||||||||
| C56tv_off | _local | COM8tv_off |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 8 Jun 11 and 22 Jun 11.
How do the old analogue and currrent digital signal levels compare?
| Analogue 1-5 | 500kW | |
| SDN, ARQA, ARQB, BBCA, D3+4, BBCB | (-7dB) 100kW | |
| com7 | (-10.7dB) 42.9kW | |
| com8 | (-11.1dB) 39.2kW | |
| Mux 1*, Mux 2*, Mux A*, Mux B*, Mux C*, Mux D* | (-14dB) 20kW | |
| LG | (-20dB) 5kW |
Local transmitter maps
Black Hill Freeview Black Hill DAB Black Hill TV region BBC Scotland STV Central (Glasgow micro region)Which companies have run the Channel 3 services in the Black Hill transmitter area
|
|
Monday, 13 June 2011
D
David12:22 PM
Hi,
Cannot receive any BBC channels via free view box since switchover (Sat 12 June). Tried new installation several times to no avail. other channels missing include the most popular ones eg yeserday; film 4 etc.
Can anyone suggest a fix?
| link to this comment |
M
Mike Dimmick1:56 PM
ALL: A common problem is that, if signal levels were already on the high side before switchover, the new signal levels are too high and cause distortion. Some boxes will not be able to read the distorted signal level properly and report a lower signal level. You will often get picture and sound break-up and in the worst cases the multiplex will not be decodable.
If you have a booster or amplifier, you should remove it or turn it down. In some cases you may have fitted, or had fitted, a new aerial with too much gain - in this case, add an attenuator. If you're using a communal aerial, your landlord or agent should be ensuring that the levels entering your property are appropriate.
The new multiplex is definitely running at the final power level - if it were not, the relays would not be able to receive it in order to retransmit it.
Another common problem is old onDigital/ITV Digital or early Freeview equipment that cannot handle the 8K mode used after switchover. Check if it's on the list at http://www.digitaluk.co.uk/2kequipment . It also might not be able to handle the larger Network Information Table in use since 2008 - see http://www.digitaluk.co.uk/splitnit . These lists are not complete, there may be other affected equipment not on them.
| link to this comment |
B
Bigdave7:18 PM
The extra channels in the 800 range mean that Humax PVRs will not record any programs o the channels with the correct number for the identical channel. Retuning as suggested by Humax for similar problem last year seems not to work. The workaound is to leave the box on at the time you want to record and it then seems to record but not in standby. Hope it will go away after 22 June when 800+ channels disappear
| link to this comment |
S
Scott7:37 PM
I have the HD version of the Humax box, which may work differently. However, what I did was to start an automatic rescan then immediately abort it. This left me with no channels at all. I then did a manual scan for each of the six Blackhill multiplexes (see top of page for details and remembemr to use the old numbers except for BBC-A which is the only multiplex to have moved). This seems to have worked perfectly. (If you have HD you need to change to DBV-T2 for channel 59 only.).
| link to this comment |
Bigdave: You get channel in the 800 range when you have failed to clear out the channel list before rescanning.
| link to this comment |
S
Scott7:51 PM
Briantist: Would you not get the same problem if you receive multiple incidences of the same station during the scan? I seemed to BBC1 three times.
| link to this comment |
Tuesday, 14 June 2011
M
Matt12:00 PM
Scott, what you say is true. one solution for this is to perform a factory reset or first time installation with no aerial connected so you clear the channel list. then manually tune only the frequencies from your local transmitter.
| link to this comment |
S
Scott6:27 PM
Matt: Actually that is effectively what I did with my Humax box. I started the automatic scan then aborted it, leaving no stations at all. I then manually scanned each of the six multiplexes. Only problem was that the HD multiplex showed nothing, until I realised that the default setting was DVB-T and had to be changed to DVB-T2. Having said all that, I was speaking to a colleague on the train home and I asked him if he had picked up multiple transmitters and how did he go about selecting the correct one. He had no idea what I was on about and said that he had followed the instructions and carried out a full scan. How many people, I wonder, will now be left with their equipment tuned to a transmitter that is not the strongest signal? I have to say that until this all started I knew next to nothing about digital television, main transmitters, relays etc so this has been an interesting learning experience and diversion into a completely new field. I am now getting quite enthusiastic!
| link to this comment |
G
GCD6:48 PM
Hi, i just recently bought a HD freeview box, and we live in a flat in the Castlemilk area surrounded by other buildings, so a communal aerial is the only way to get any pictures on the TV...but even with this i have not yet been able to get any HD channels even though the council installed just 2 years ago a new communal Ariel......do you think this power increase that's coming on the 22 of June will solve the matter.
I'm hoping it does because even getting another TV to run in the bedroom by splitting via a Ariel splitter is a nightmare as the signal just seems very weak at all times.
Thanks for any advice.
| link to this comment |
K
KMJ,Derby8:21 PM
GCD: If you have a good analogue signal at present you should have no difficulty with Freeview after 22nd June 2011. All six muxes will be transmitted at the same power (100kW) and in group B which makes distribution easier than at present. Mux BBCB (the HD services) will be transmitted on C40, replacing analogue BBC1.
| link to this comment |
Select more comments
Your comment please