Full Freeview on the Angus (Dundee City, Scotland) transmitter
 | Google map |  | Bing map |  | Google Earth |  | 56.554,-2.987 or 56°33'15"N 2°59'15"W |  | DD4 0RQ |
The symbol shows the location of the Angus (Dundee City, Scotland) transmitter which serves 130,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Angus (Dundee City, Scotland) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Angus transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Angus transmitter?
BBC Reporting Scotland 2.4m homes 9.2%
from Glasgow G51 1DA, 112km southwest (228°)
to BBC Scotland region - 230 masts.
STV News 0.2m homes 0.8%
from Dundee DD1 4QB, 11km south (177°)
to STV North (Dundee) region - 24 masts.
Are there any self-help relays?
| Glen Cova A | Active deflector | 40 km N of Dundee | |
| Glen Cova B | Active deflector |
How will the Angus (Dundee City, Scotland) transmission frequencies change over time?
| 1965-80s | 1984-97 | 1997-98 | 1998-2010 | 2010-13 | 2013-18 | 2013-17 | 27 Nov 2019 | ||
| VHF | C/D E | C/D E | C/D E | C/D E | C/D E T | W T | W T | ||
| C11 | ITVwaves | ||||||||
| C31 | com7 | com7 | |||||||
| C33 | SDN | ||||||||
| C34 | _local | ||||||||
| C36 | ArqA | ||||||||
| C37 | com8 | com8 | |||||||
| C39 | BBCA | ||||||||
| C42 | D3+4 | ||||||||
| C45 | BBCB | ||||||||
| C48 | _local | _local | _local | ArqB | |||||
| C49tv_off | ArqB | ArqB | |||||||
| C53tv_off | C4waves | C4waves | C4waves | D3+4 | D3+4 | D3+4 | |||
| C54tv_off | SDN | SDN | SDN | ||||||
| C55tv_off | com7tv_off | ||||||||
| C56tv_off | COM8tv_off | ||||||||
| C57tv_off | BBC1waves | BBC1waves | BBC1waves | BBCB | BBCB | BBCB | |||
| C58tv_off | ArqA | ArqA | ArqA | ||||||
| C60tv_off | ITVwaves | ITVwaves | ITVwaves | -BBCA | -BBCA | ||||
| C61 | ArqB | ||||||||
| C63 | BBC2waves | BBC2waves | BBC2waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 4 Aug 10 and 18 Aug 10.
How do the old analogue and currrent digital signal levels compare?
| BBCA, D3+4, BBCB | 20kW | |
| SDN, ARQA, ARQB | (-3dB) 10kW | |
| com7 | (-6dB) 5kW | |
| com8 | (-6.1dB) 4.9kW | |
| Mux 1*, Mux 2*, Mux A*, Mux B* | (-7dB) 4kW | |
| Mux C*, Mux D* | (-10dB) 2kW | |
| Analogue 1-4 | (-23dB) 100W |
Local transmitter maps
Angus Freeview Angus DAB Angus AM/FM Angus TV region BBC Scotland STV North (Dundee micro region)Which companies have run the Channel 3 services in the Angus transmitter area
|
|
Is the transmitter output the same in all directions?
Radiation patterns withheldThursday, 3 November 2011
S
Stuart4:05 PM
Just to let you know, the FEC mode changes announced for 2/11/11 and 3/11/11 on Angus haven't materialised.
| link to this comment |
Sunday, 25 March 2012
G
G7310:56 AM
JOHN:
I have a problem with freezing on itv2 and E4 on c53 from the Angus transmitter. These are the only 2 program channels that are affected on this mux or any of the other muxes can you help? Initially I thought it could be the freeview receiver but this has been replaced with a DTV. Thanks
| link to this comment |
G
G7311:50 AM
jb38:
I have a problem with freezing on itv2 and E4 on c53 from the Angus transmitter. These are the only 2 program channels that are affected on this mux or any of the other muxes can you help? Initially I thought it could be the freeview receiver but this has been replaced with a DTV. Thanks
| link to this comment |
J
jb387:00 PM
G73: Although you have indicated that you are receiving from the Angus transmitter, unfortunately is not really possible for me to reply with any level of accuracy without being able to assess the signal strength thats liable to be expected in your area without having knowledge of your post code, or at least one from very close to your location like a shop or whatever.
The other point thats slightly puzzling being that the channel you mention is one of the three higher powered ones, something which could indicate that your problem is possibly being caused by interference from far further afield and due to the current atmospheric conditions applying.
| link to this comment |
Monday, 26 March 2012
G
G7310:09 AM
jb38: Thanks for your reply. The signal strength on all the muxes is very high and the property is within 3 miles of the transmitter. The strange thing is the signal is split to another room yet there is no problem with the freezing etc. I could understand more if all the channels on a particular mux were having the same problem but as highlighted it is only ITV2 and E4 in only 1 of the rooms.
| link to this comment |
J
jb383:04 PM
G73: Based on what you have reported regarding your location in relation to the transmitters does give rise to suspicion that an excessively strong signal could be affecting the tuner which is resulting in an element of instability to occur in same, something which can cause odd problems. however I would like you to try a test by disconnecting the splitter from the aerial and connecting the lead feeding the problem box directly into the aerials down-lead and checking the results of this action, as should the problem get worse by doing that then the signal is too strong, so if you have access to a set top aerial plug that into the box concerned and check the results.
This said taking it that the splitter referred to isn't a powered version? as if it is then by-pass it.
The other point I would like to know the result of is whether or not whilst on Ch53 the signal "quality" is observed as continually jumping up and down when observed over a few minutes on the boxes signal strength / quality indicator, that is "if" the box can display the quality separately from the strength and many types combine them, not the best for accuracy!
I realise that you have said the problem has spanned over two separate devices, but have you tried the test of completely re-setting the box to guarantee that everything stored has been deleted, then this action being followed by carrying out a re-tune? I suggest this just in case some glitch has occurred during a previous re-tune and has corrupted the data stored.
| link to this comment |
Thursday, 13 September 2012
S
Stuart Trayner10:06 PM
Dundee
Is it possible to get full freeview from my location DD2 1QJ,currently my signal comes from taybridge a partial transmitter.
| link to this comment |
Stuart's: mapS's Freeview map terrainS's terrain plot wavesS's frequency data S's Freeview Detailed Coverage
J
jb3811:43 PM
Stuart Trayner: Well you are not indicated on the trade reception predictor to be able to receive anything other than you are presently able to do, although as you are also predicted to be able to receive signals from Blackhills PSB muxes then "if" you can access your aerial then it wouldn't do any harm to swing it around to 219 degrees and change its polarity to horizontal, then go into your TV or boxes "manual" tune menu and scan mux channels 41 - 44 - 47 one at a time to see if anything is indicated, these being the commercials from Blackhill.
| link to this comment |
Friday, 14 September 2012
Stuart Trayner: In addition to the message from jb38, it is worth pointing out that the Commercial multiplexes from Black Hill (those which Taybridge doesn't broadcast) are all co-channel with the three multiplexes from Tay Bridge (albeit that Black Hill is horizontally polarised and Tay Bridge is vertically so).
So unless you can mount your aerial in some way such that the Tay Bridge signals are blocked *and* that the Black Hill ones are still available, then I don't think you have much chance of increasing your viewing choice via terrestrial television.
| link to this comment |
Saturday, 15 September 2012
J
jb387:38 PM
Dave Lindsay: Re: posting 14th @ 12:55am. Well although I will agree that you are certainly quite correct in expressing some doubts about what I had mentioned to Stuart with regards to an aerial turning / polarity change test, and basically because of the comm's from Blackhill being on the same channels as Tay bridge's PSB's and the fact that this could seriously limit the chances of success, but what was mentioned was based on my personal knowledge of this procedure having achieved the desired effect at a residence approximately 1 mile to the West of the area in question, albeit it still being out with the reach of the Angus transmitter, but the Tay Bridge signal is not always particularly good along "parts" of the river line and with this making it much more easily nulled out by even the change in aerial polarity.
Of course the impediment that certainly does exist concerning this location is because that a true 90 degree null on Tay Bridges signal cannot be achieved, however the trees located in the signal path line help slightly to offset the impediment to a proper null not being achieved.
That said though, experiments such as these are always hit and miss as far as them being successful, and so this type of action is really more in the realms of an enthusiast, which of course not everyone is!
| link to this comment |
Select more comments
Your comment please