Full Freeview on the Emley Moor (Kirklees, England) transmitter
 | Google Streetview |  | Google map |  | Bing map |  | Google Earth |  | 53.611,-1.666 or 53°36'41"N 1°39'57"W |  | HD8 9TF |
The symbol shows the location of the Emley Moor (Kirklees, England) transmitter which serves 1,550,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Emley Moor (Kirklees, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Emley Moor transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Emley Moor transmitter?
BBC Look North (Leeds) 1.9m homes 7.4%
from Leeds LS9 8AH, 22km north-northeast (22°)
to BBC Yorkshire region - 56 masts.
ITV Calendar 1.9m homes 7.4%
from Leeds LS3 1JS, 22km north-northeast (16°)
to ITV Yorkshire (Emley Moor) region - 59 masts.
All of lunch, weekend and 80% evening news is shared with Belmont region
Are there any self-help relays?
| Derwent B | Active deflector | 74 homes | |
| Derwent C | Active deflector | (second level) | |
| Dunford Bridge | Active deflector | 14 km S Huddersfield | 15 homes |
| Hmp Leeds | Transposer | 30 homes | |
| Thixendale | Transposer | 25 km ENE York | 40 homes |
How will the Emley Moor (Kirklees, England) transmission frequencies change over time?
| 1956-80s | 1984-97 | 1997-98 | 1998-2011 | 2011-13 | 5 Feb 2020 | ||||
| VHF | B E T | B E T | B E T | B E T | W T | ||||
| C10 | ITVwaves | ||||||||
| C32 | com7 | ||||||||
| C33 | SDN | ||||||||
| C34 | com8 | ||||||||
| C36 | ArqA | ||||||||
| C37 | C5waves | C5waves | |||||||
| C39 | _local | ||||||||
| C41 | C4waves | C4waves | C4waves | BBCB | BBCB | ||||
| C44 | BBC1waves | BBC1waves | BBC1waves | D3+4 | D3+4 | ||||
| C47 | ITVwaves | ITVwaves | ITVwaves | BBCA | BBCA | ||||
| C48 | ArqB | ArqB | |||||||
| C51tv_off | BBC2waves | BBC2waves | BBC2waves | SDN | |||||
| C52tv_off | ArqA | ||||||||
| C55tv_off | com7tv_off | ||||||||
| C56tv_off | LLS |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 7 Sep 11 and 21 Sep 11.
How do the old analogue and currrent digital signal levels compare?
| Analogue 1-5 | 870kW | |
| SDN, ARQA, ARQB, BBCA, D3+4, BBCB | (-7dB) 174kW | |
| com7 | (-12dB) 54.8kW | |
| com8 | (-12.3dB) 51.2kW | |
| Mux 1*, Mux 2*, Mux B*, Mux C* | (-19.4dB) 10kW | |
| Mux A*, LLS | (-22.4dB) 5kW | |
| Mux D* | (-23.4dB) 4kW |
Which companies have run the Channel 3 services in the Emley Moor transmitter area
|
|
Thursday, 18 July 2013
D
david parker11:03 AM
Briantist
I have got your email thankyou,but i am not certon how to work it,can you help me please
| link to this comment |
Ron Lake
12:26 PM
12:26 PM
David Parker,
I have been unable to try much of anything as I have been admitted to Pinderfields Hospital four times since Christmas and am still recovering slowly. Starting to get a little bit done now, but some of the painting is STILL on hold I'm afraid. Thanks for your interest, and my apologies to everyone for being 'off topic'.
| link to this comment |
D
david parker1:01 PM
Ron Lake
O dear that is not good news hope you soon get well,Have words with you some other time take care.
| link to this comment |
I have a Sony RDR-HXD870 and sometimes when I set something to record on LCN 001 BBC One it decides instead to record from one of the BBC Ones in my 800s, these being those of Belmont and Bilsdale.
Last night I was hoping to watch The Apprentice from the beginning only to find, with the programme a few minutes in, that my recorder was sat "Timer Ready" with "No Signal" - it was on LCN805. It turns out that LCN805 is C50 which is Winter Hill!
I am using a DM Log fitted in the loft. Winter Hill is only a few degrees of the bearing to Emley Moor, albeit that the Pennines are obstructing line-of-sight.
Today there is 0% signal strength showing on C50 and too on C59 (PSB2 from Winter Hill). Despite this it has populated the EPG, which confirms my suspicion that it is Winter Hill because the regional news programme is North West Today.
How come the EPG has been populated? Would I be right in concluding that EPG data for BBC One and ITV for the North West region must be being carried by Yorkshire or one of the other regions I am picking up?
How might I get around this? I have already fitted an attenuator so as to fade out Bilsdale and Belmont. I suspect that Winter Hill was added a few weeks ago (prior to installation of the attenuator) because Drama from Emley Moor is on LCN809. Oh and it has also picked up C59/ITV Granada from Winter Hill.
Might setting parental control on these 800 services rule out the possibility of it automatically switching whilst still allowing me to view them if I wished?
I could wipe the thing and store only Emley Moor channels and fit the attenuator in the hope of preventing it from storing other transmitters. But if I wish to receive a different region having done so I would have to wipe and start again.
| link to this comment |
Dave's: mapD's Freeview map terrainD's terrain plot wavesD's frequency data D's Freeview Detailed Coverage
M
MikeB3:10 PM
Peterborough
Dave Lindsay: I find that my HX995 is also very sensitive, and at least once I found the multiple 800 BBC1's (from belmont and sandy heath as well as waltham) recorded, rather than the 001 which I selected. The irony is that the tuner is also very stable, so it does not break up easily.
I'd start by 'hiding' the 800's using parental control - it at least means you can't record accidently, and things have improved. I'm thinking of using rubbish leads, just to bring down the strength a little (Scandal did break up a bit in recording), but i think that an attenator might be a good idea for you.
| link to this comment |
MikeB's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
M
MikeB3:12 PM
Peterborough
Sorry, I meant to say a more powerful attenator.
| link to this comment |
MikeB's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
Monday, 22 July 2013
JB38 Ref my queriy on recording drama channel on youview. I can record ITV3 no problem but still cannot record drama. I can record drama on my other box must be copy right or such on youview.So will continue to record on other box ta
| link to this comment |
john's: mapJ's Freeview map terrainJ's terrain plot wavesJ's frequency data J's Freeview Detailed Coverage
J
jb386:03 PM
john: Although by rights you should be able to record the Drama channel as it does not have any restrictions on it, however I have since found out that a number of YouView boxes of the Huawei brand are unable to record Drama because of a defect within the box, and which has not as yet been rectified, YouView having been aware of this problem since the 8th when Drama first started.
The question is, do you have this brand of box?
| link to this comment |
Wednesday, 24 July 2013
jb38 thanks for that. Yeah your right huawei box.But got it from talktalk. No doubt there wiThankfully I can record on other box.
| link to this comment |
john's: mapJ's Freeview map terrainJ's terrain plot wavesJ's frequency data J's Freeview Detailed Coverage
J
jb388:53 PM
john: Thanks for the confirmation that you do indeed have one of these boxes, but just for the record should you find the time to do this I would be obliged if you could inform me as to the software version thats installed in your box, as at the end of March a software download was sent to these boxes for the purpose of loading in software version 12.27.07.
You can find out the version installed by using the following procedure.
1: Press the YouView button on the TalkTalk remote.
2: Select Settings and press OK on the TalkTalk remote.
3: Select System Information and press OK on
the TalkTalk remote.
4: Select Software Versions and press OK using the TalkTalk remote.
5: You will now be able to see the manufacturer software and component
software version numbers.
| link to this comment |
Select more comments
Your comment please