Full Freeview on the Hannington (Hampshire, England) transmitter
Google Streetview | Google map | Bing map | Google Earth | 51.308,-1.245 or 51°18'28"N 1°14'43"W | RG26 5UD |
The symbol shows the location of the Hannington (Hampshire, England) transmitter which serves 470,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Hannington (Hampshire, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Hannington transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Hannington transmitter?
![regional news image](/styles/images/regionalnews/302x152/bbc-south-today.jpg)
BBC South Today 1.3m homes 4.9%
from Southampton SO14 7PU, 46km south-southwest (194°)
to BBC South region - 39 masts.
![regional news image](/styles/images/regionalnews/302x152/itv-meridian.jpg)
ITV Meridian News 0.9m homes 3.4%
from Whiteley PO15 7AD, 48km south (179°)
to ITV Meridian/Central (Thames Valley) region - 15 masts.
Thames Valley opt-out from Meridian (South). All of lunch, weekend and 50% evening news is shared with all of Meridian+Oxford
How will the Hannington (Hampshire, England) transmission frequencies change over time?
1984-97 | 1997-98 | 1998-2012 | 2012-13 | 18 Apr 2018 | |||||
E | E | E | B E T | W T | |||||
C32 | com7 | ||||||||
C34 | com8 | ||||||||
C35 | C5waves | C5waves | |||||||
C39 | BBC1waves | BBC1waves | BBC1waves | +BBCB | BBCB | ||||
C40 | SDN | ||||||||
C41 | SDN | ||||||||
C42 | ITVwaves | ITVwaves | ITVwaves | D3+4 | D3+4 | ||||
C43 | ArqA | ||||||||
C44 | ArqA | ||||||||
C45 | BBC2waves | BBC2waves | BBC2waves | BBCA | BBCA | ||||
C46 | ArqB | ||||||||
C47 | ArqB | ||||||||
C51tv_off | _local | ||||||||
C55tv_off | com7tv_off | ||||||||
C56tv_off | COM8tv_off | ||||||||
C66 | C4waves | C4waves | C4waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 8 Feb 12 and 22 Feb 12.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 250kW | |
Analogue 5 | (-6.2dB) 60kW | |
BBCA, D3+4, BBCB | (-7dB) 50kW | |
com7 | (-8.3dB) 36.7kW | |
com8 | (-9.8dB) 26.2kW | |
SDN, ARQA, ARQB | (-10dB) 25kW | |
Mux 1*, Mux 2*, Mux A*, Mux B* | (-11dB) 20kW | |
Mux C*, Mux D* | (-14dB) 10kW |
Which companies have run the Channel 3 services in the Hannington transmitter area
|
|
Wednesday, 30 August 2017
B
Brian Gregory7:12 PM
Why is it taking so long for information on the new local multipex for Reading to be added?
link to this comment |
Friday, 1 September 2017
Transmitter engineering
2:32 PM
2:32 PM
HANNINGTON transmitter - DAB: BBC National DAB Radio Weak Signal from 10:34 today to 11:55 today. [BBC]
link to this comment |
Saturday, 2 September 2017
Transmitter engineering
5:32 AM
5:32 AM
HANNINGTON transmitter - DAB: BBC National DAB Radio Weak Signal from 10:34 yesterday to 11:55 yesterday. [BBC]
link to this comment |
Sunday, 3 September 2017
Transmitter engineering
5:32 AM
5:32 AM
HANNINGTON transmitter - DAB: BBC National DAB Radio Weak Signal from 10:34 on 01 Sep to 11:55 on 01 Sep. [BBC]
link to this comment |
Tuesday, 12 September 2017
B
Brian Gregory8:52 PM
PLEASE tell what the Three new channels are. I know one is That's Thames Valley but what are the other two?
link to this comment |
S
StevensOnln111:03 PM
Brian Gregory: The other channels on the local mux which are broadcast alongside That's Thames Valley are True Crime (channel 60), True Movies (channel 62 9pm-5am only), Tiny Pop (channel 207) & Pop Max (5am-9pm only).
link to this comment |
Wednesday, 15 November 2017
C
Chris Wood6:07 PM
I live in Reading and receive Freeview from Hannington. I've just realised that Freeview channel 1, which has always been BBC 1 South is now showing BBC London. After a diligent search of the channels, I discovered BBC 1 South hiding amongst a load of radio channels at channel 800.
I'm not sure if this is a technical glitch or a policy change. If the latter, I cannot say I've seen any publicity about it, and it doesn't seem particularly sensible. I don't think of either Hannington or Reading being in London. If it is a glitch, is there anything I can do to sort it out.
Ps. If it helps, ITV on chsnnel 3 is still showing Meridien, rather than whatever the London equicalent is.
link to this comment |
S
StevensOnln16:41 PM
Chris Wood: Your TV (or set top box) has retuned and picked up BBC1 London from Crystal Palace before also finding BBC1 South from Hannington (Hannington uses higher frequencies than Crystal Palace and would therefore be found first on a retune if both are receivable). If you do a manual tune on UHF C39 from your TV's menu it should restore BBC1 South to position 1 on the program guide.
link to this comment |
Saturday, 27 January 2018
R
Roger Scott7:42 PM
I can receive both Hannington and Crystal Palace signals (both approximately the same strength) and have the 2 aerials terminating into a diplexor with the Crystal Palace going into the "A" group input (channels 21-33) and Hannington going into the "E" group input (channels 39-68). Everything was fine until BBC4 HD recently moved frequency. Now BBC4 HD is breaking up due to very low signal. I realised that their new frequency is on channels 34 and 35 which is between the channel inputs of my diplexor and hence this is attenuating the signal on this frequency. I then replaced the diplexor with a Labgear 2 way splitter that is wide band and I can now get BBC4 HD again on full signal. Unfortunately this has created further problems as I can no longer get Freeview channels 7 and 8 (London Live and That's Hampshire) which I was getting with reasonable signal. There is a large overlap on the frequencies used by the Hannington and Crystal Palace stations. For example Crystal Palace uses channel 33 but Hannington uses channel 32 and also channel 29 I believe for That's Thames Valley. Any advice in resolving this problem would be appreciated
link to this comment |
Tuesday, 30 January 2018
C
Chris.SE2:30 PM
Roger Scott: This might be a tricky one to solve!. I can only assume that you were originally receiving BBC4HD from Crystal Palace COM7 (Ch.33) as COM7 on Hannington is on Ch.32 and your Hannington Aerial would be in the wrong diplexer input to get that signal without severe attenuation. BBC4HD moving to COM8 (Ch.35 Crystal Palace) or Ch.34 Hannington possibly won't have been helped by the slightly lower power used for COM8.
My understanding for Hannington is that the Local TV Mux aimed at Basingstoke is on Ch.51 whereas there is one aimed at Reading on Ch.29. I can again only assume you were getting the Basingstoke one. The Crystal Place local Mux is on Ch.29, and you got both of these because of your location and aerial directions.
Now that you are using a splitter instead of a diplexer, there could be some conflict with the Ch.29 muxes which stops you getting London Live, but there ought not be be an issue with That's Hampshire on the Ch.51 mux. However, Local muxes are on a much lower power compared to the main ones. Diplexers don't usually have much insertion loss, whereas a splitter can have quite a lot depending on type and this could reduce the signal strength sufficiently. There are types with low insertion loss which may not be what you have, but I would firstly try to see exactly what you can currently receive on each aerial plugged directly into the set without a diplexer or splitter to check you can get what you'd expect, you'll then have an idea whether the insertion loss from the splitter is the primary problem.
link to this comment |
Select more comments
Your comment please